Your original question was slightly misleading. This motor is not a servo, but a brushless motor. Heikki's answer above is correct. This mostly has nothing to do with the IOIO. The IOIO-related piece is using a PwmOutput to generate a 50Hz PWM signal, with the pulse width varying between 1-2ms for controlling the speed.
On Thu, May 21, 2015 at 1:25 AM, 'M. A.' via ioio-users < [email protected]> wrote: > Hi Ytai, > > Thanks for your reply. Sorry for not being clear enough, but with "As fast > as possible" I didn't mean to drive the motors in such a way, I meant to > finish my app, i.e. to learn the corresponding IOIO libraries and > interfaces and how to use them to reach my goal which is controlling the > speed of servo motors. > So I would be very grateful if you could point me to what to read, to look > for or to some tutorials. The servo I am using is DJI 2212/920KV, the one > coming with the Flyver DJI kit > > Many thanks > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
