Gabor, I'm reading the value of a toggle switch outputting PWM by passing the signal through a low pass RC filter and then reading the value on an Analog IN pin. It's not pretty, but it works pretty reliably since I'm out of PuseInput modules. If you have something that doesn't need any fidelity that could be an option.
On Tue, Sep 8, 2015 at 2:59 AM, Gabor Schilten <[email protected]> wrote: > Thanks. Got it working. However, no idea how to get the 10th 'sensor' > working based on PWM ;) > > Op dinsdag 8 september 2015 08:16:58 UTC+2 schreef Gabor Schilten: >> >> Hi, >> >> For an interesting new project, i have to intercept 6 rc receiver >> channels, and around 4 ultrasonic sensors to start with. >> Outputting 6 pwm signals then for all engines and servo's.. >> >> However, according to the wiki, we only have 3 *single-precision* and 3 >> *double-precision* pulse input modules. >> If I'd exchange the 3 doubles for 6 single precision, I'd end up with 9. >> >> Is there something I'm missing here? Or do I need to look for eather >> another IOIO board or Sensors based on I2C? >> >> Thanks. >> >> Gabor >> > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
