Sorry, hit send too soon... That would happen if you short pin 1 to GND while booting into bootloader mode. If you are sure this is not the case, sounds like you might have a faulty unit. Try replacing it. Is it from one of the official manufacturers? On Mar 6, 2016 5:24 PM, "Ytai Ben-Tsvi" <[email protected]> wrote:
> One thing that might cause this is if the configuration gets wiped all the > time. > On Mar 6, 2016 4:02 PM, "Colby LaRue" <[email protected]> wrote: > >> When I power the IOIO board, the stat light is flashing quickly. Plugging >> in to a computer fixes it, but I have to do that multiple times for it to >> finally work. It will only work a short while. The next time the board is >> powered up, the flashing light comes up again. I have flashed the newest >> firmware to it, and still no luck. I should not be having to plug this >> thing in every time I want to use it. >> >> Thanks for your feedback and help >> Colby >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
