Hi everyone-
I'm new to the development list, so please excuse me if I'm treading over old ground. I'm developing a product that does not have an IPMB, but still uses a mostly-IPMI compliant BMC for management. I'm able to use IPMItool to establish IPMI-over-LAN and SOL sessions and have full functionality over the KCS interface. However, the sensor command does not work over an IPMI-over-LAN session. The sdr command uses ipmi_sdr_get_sensor_reading to read the sensor readings, but the sensor command uses ipmi_sdr_get_sensor_reading_ipmb to do the same function. Changing the ipmi_sdr_get_sensor_reading_ipmb calls to ipmi_sdr_get_sensor_reading calls fixes the problem for me, so I was hoping this was something that could be incorporated into a future release. Is there a reason for using the _ipmb function? If not, is it reasonable to change the function calls in ipmi_sensor.c to ipmi_sdr_get_sensor_reading? Attached is the updated ipmi_sensor.c if you would like to try it out. Thank you! Regards, -Ben Bloom RadiSys Corporation 5445 NE Dawson Creek Drive Portland, OR 97124 (503) 615-1569
ipmi_sensor.c
Description: ipmi_sensor.c
------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
