Hi,
I'm using ipmitool on IBM x3455 machines. It works well, until I
send to BMC the command
'bmc reset cold'. After that, BMC loose the lan channel as 'ipmitool lan
print' and '
ipmitool lan print 1' say:
# ipmitool lan print
Invalid channel: 255
# ipmitool lan print 1
Channel 1 is not a LAN channel
I've done all kind of reset but BMC still doesn't see the lan channel.
I've done cold reset on three machines
and all have lost the lan channel.
Another problems is that on these IBM x3455 I have 3 NIC, 2 onboard and
one PCIe.
On some machines IPMI traffic goes through the second onboard NIC, on
some other on the PCIe NIC
and in few cases it goes through one of the onboard NIC with the MAC
address on the PCIe.
Someone can explain me what does the command 'bmc reset cold' really do
and how can resume IPMI operation
on the BMC resetted?
Massimo.
--
____ ____ ____ _ _
/ ___)| __ \/ ___)/ /| | Dott. Massimo Gaggero
| (___ | /\___ \\__ | Expert Software Engineer
\____)|_|\_\(____/ |_| Advanced Computing and Communications - Distributed
Computing
E-mail: [EMAIL PROTECTED] Phone: +39 070 9250 329
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
