It was the first thing I've done after bmc reset cold. I've removed the power plug for about an half day but nothing changed...
Massimo Cress, Andrew R ha scritto: > In general, one way to get the BMC back to default behavior is to remove > the power plug for about 10 seconds. It is a brute-force way of doing > BMC reset, plus, unlike a BMC reset command, it doesn't get the BMC out > of sync with the BIOS. > > Andy > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of James > Pearson > Sent: Friday, December 14, 2007 8:26 AM > To: Massimo Gaggero > Cc: ipmitool-devel@lists.sourceforge.net > Subject: Re: [Ipmitool-devel] Strange problems on IBM x3455. > > Massimo Gaggero wrote: > >> Hi, >> I'm using ipmitool on IBM x3455 machines. It works well, until I >> send to BMC the command >> 'bmc reset cold'. After that, BMC loose the lan channel as 'ipmitool >> > lan > >> print' and ' >> ipmitool lan print 1' say: >> >> # ipmitool lan print >> Invalid channel: 255 >> # ipmitool lan print 1 >> Channel 1 is not a LAN channel >> > > I've actually seen the opposite ... I've had to do a 'bmc reset cold' on > > machines that say there is no lan channel to force it to be found ... > however, I can't remember if this is with IBM x3455 machines (we have a > number of these) > > James Pearson > > > ------------------------------------------------------------------------ > - > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketp > lace > _______________________________________________ > Ipmitool-devel mailing list > Ipmitool-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ipmitool-devel > -- ____ ____ ____ _ _ / ___)| __ \/ ___)/ /| | Dott. Massimo Gaggero | (___ | /\___ \\__ | Expert Software Engineer \____)|_|\_\(____/ |_| Advanced Computing and Communications - Distributed Computing E-mail: [EMAIL PROTECTED] Phone: +39 070 9250 329 ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
