double check with Supermicro as some vendors don't allow for ping to the
IPMI interface. Dell is one. you can in the firmware setup if ping is
allowed or not on some units and on some others it's just not pingable.
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Choi,
Paul
Sent: Wednesday, August 13, 2008 10:53 AM
To: Cress, Andrew R; ipmitool-devel@lists.sourceforge.net
Subject: Re: [Ipmitool-devel] IPMI Unable to ping
Thx all for replying.
I still don't understand "patched in" means. Since I have two on board
NICs, I plugged in both ports given ip address and I can ping both NIC
from outside.
But I can't still ping IPMI card. I checked with vendor (Supermicro) and
they said it should use first NIC for IPMI. I checked the card and it is
blinking but it can't ping (but I can do everything except accessing it
via IP).
________________________________
From: Cress, Andrew R [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 1:58 PM
To: Choi, Paul; ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] IPMI Unable to ping
The Link Auth parameter being false should still work. Mine is set up
that way and it works.
Perhaps what James mentioned is the key. Making sure that you have
configured the right LAN channel that is connected.
Is there a LAN channel dedicated to the IPMI card?
How many IPMI LAN channels are there?
ipmitool channel info N
will show the IPMI channels, where N=1,2,3, etc. and the LAN channels
will have Medium Type = 802.3 LAN.
Andy
________________________________
From: Choi, Paul [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 1:34 PM
To: Cress, Andrew R; ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] IPMI Unable to ping
Andy,
For enabled user on my new IPMI card:
#ipmitool user list 1
ID Name Callin Link Auth IPMI Msg
Channel Priv Limit
1 true false true
ADMINISTRATOR
2 ADMIN true false true
ADMINISTRATOR
For old IPMI card:
ID Name Callin Link Auth IPMI Msg
Channel Priv Limit
2 ADMIN true true true
ADMINISTRATOR
3 ~ 10 NO ACCESS
Only difference I see is Link Auth. How can I set it up?
Thx again.
Paul
________________________________
From: Cress, Andrew R [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 1:07 PM
To: Choi, Paul; ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] IPMI Unable to ping
Paul,
ipmitool channel getaccess 1
will list access for all users for the lan channel 1
ipmitool user list 1
will list the users that are enabled for lan channel 1
Andy
________________________________
From: Choi, Paul [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 11:18 AM
To: Cress, Andrew R; ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] IPMI Unable to ping
Thx for replying
Is the IPMI LAN channel enabled?
'Ipmitool -I open lan set 1 access on' Is this good enough to enable
channel?
Is the admin user enabled for the LAN channel?
How do I do this? 'ipmitool -I open lan set 1 user ADMIN' ?
Is the BMC IPMI 1.5 or IPMI 2.0?
IPMI 2.0
Sorry if these basic questions. I am kind of new on ipmitool.
Thx again
________________________________
From: Cress, Andrew R [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2008 10:38 AM
To: Choi, Paul; ipmitool-devel@lists.sourceforge.net
Subject: RE: [Ipmitool-devel] IPMI Unable to ping
Three things to check:
Is the IPMI LAN channel enabled?
Is the admin user enabled for the LAN channel?
Is the BMC IPMI 1.5 or IPMI 2.0?
Andy
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Choi,
Paul
Sent: Wednesday, August 06, 2008 9:12 AM
To: ipmitool-devel@lists.sourceforge.net
Subject: [Ipmitool-devel] IPMI Unable to ping
Hi
I set IPMI up in RedHat 4 and now I am trying it in RedHat5 (with
different machines). I can set mac, ip, etc using ipmitool but I can't
access it from outside. It won't ping and if I do:
#ipmitool chassis power status -I lanplus -U ADMIN -P ADMIN -H
10.2.12.124
Error: Unable to establish IPMI v2 / RMCP+ session
Unable to get Chassis Power Status.
Here is my setting:
Set in Progress : Set In Progress
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback :
: User : MD5
: Operator : MD5
: Admin : MD5
: OEM : MD5
IP Address Source : Static Address
IP Address : 10.2.12.124
Subnet Mask : 255.255.0.0
MAC Address : ac:29:0a:02:0c:7c
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 0.0.0.0
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
RMCP+ Cipher Suites : 0,1,2,3,6,7,8,11,12
Cipher Suite Priv Max : Xaaaaaaaaaaaaaa
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
This is the exact setting from my previous IPMI card. It has no problem
pinging (of course not from itself). I checked ip and mac address of the
NIC but they are different. I looked at BIOS, and it looks like my older
IPMI servers.
Am I missing something?
Oh here is HWs that I am using:
Supermicro H8DA3-2 with AOC-SIMLC
Supermicro H8DMU+ with AOC-SIMSO
Unfortunately, using old IPMI card on new board isn't an option (won't
fit).
Thx
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
