'morning folks.
I was trying ipmitool 1.8.11 with the Dell PowerEdge R200
and I can say it works quite nicely, both locally and
over lan.
The next logic step was to try serial over lan. I've tried
both ipmitool isol and the dell redirector software
(dsm_bmu_solproxy32d).
Everything I get are some garbled characters in the middle of
correct ones, like this:
D GDeux 5.0 ele
bieD
DebiatD/LtD/Lt
iaeDux
D GDu0D5.
nielettra login 5.0y
inx
bielD leile
ne /ineNa
inyre D 5D 5.lleiD
This means that ipmitool behaves in the same way of the Dell's software,
which might be good :)
Any suggestion? I've configred the bios as described
here: http://www.virtlab.biz/hardware/67
and tried other combinations as well
thanks in advance
--
Best regards,
Alessandro Zummo,
Tower Technologies - Torino, Italy
http://www.towertech.it
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
