Alessandro Zummo wrote: > 'morning folks. > > I was trying ipmitool 1.8.11 with the Dell PowerEdge R200 > and I can say it works quite nicely, both locally and > over lan. > > The next logic step was to try serial over lan. I've tried > both ipmitool isol and the dell redirector software > (dsm_bmu_solproxy32d). > > Everything I get are some garbled characters in the middle of > correct ones, like this: > > D GDeux 5.0 ele > bieD > DebiatD/LtD/Lt > > iaeDux > D GDu0D5. > nielettra login 5.0y > inx > bielD leile > ne /ineNa > inyre D 5D 5.lleiD > > This means that ipmitool behaves in the same way of the Dell's software, > which might be good :) > > Any suggestion? I've configred the bios as described > here: http://www.virtlab.biz/hardware/67 > and tried other combinations as well > Try enabling cts/rts flow control. At the login, do: stty crtscts and that might solve the problem. It works a lot better for me.
Depending on the getty you use, you can do this in /etc/inittab. Do a "man getty" to figure it out. -corey ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
