Fred If you go to www.ipswitch.com/Support/Instant_Messenger/patch-upgrade.html you can upgrade to version 1.01 which should fix that problem.
-HJ ----- Original Message ----- From: "Fred Stover" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 25, 2003 2:56 PM Subject: [IpswitchIM_Forum] NATing questions > I have IM working inside my company's firewall, all is working great, had a > little nating problem but worked though them. > > Now, the final test: > > I have installed an IM server in a dmz zone which is where it will finally > live, with the following setup: > > I opened port 5177 outbound and inbound into the dmz, and I'm connecting to > the im server from inside the firewall. > > The test clients all show with a gray smiley face and I can't chat. > However, the chat messages are stored on the im server and will show the > next time a test client connects. > Here's the config: > > dns server inside the firewall pointing the im server in the dmz: > im.imany.com 172.16.200.7 > On the im server I have the 'nat gateway host' = im.imany.com > I have made the registry changes to the clients, prior to making them I was > showing the blue questions mark. > > Any thoughts? > > Fred > > > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp
