Fred Since the options that are configurable are actually stored on the server, not the client, it makes it necessary to log on to change these.
-HJ ----- Original Message ----- From: "Fred Stover" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, February 26, 2003 9:47 AM Subject: RE: [IpswitchIM_Forum] NATing questions > Not sure what I did, but it started working. > > It makes a big difference, stopping and starting the service from the status > tab or click the ok button after making changes. Seems like the changes > only occur when the okay button is pushed? > > Also, I uninstalled reinstalled. And a combination of all these, made magic > happen. > > Now, the only complaint is, I have two im servers; 1.0 and 1.1, 1.0 client > can't connect to 1.1 and 1.1 can't connect 1.0 :( > > And, I like the persistant connect option but it doesn't do a bit of good if > you need to connect first, what's up with that? > > -----Original Message----- > From: Fred Stover > To: '[EMAIL PROTECTED]' > Sent: 2/26/03 9:05 AM > Subject: RE: [IpswitchIM_Forum] NATing questions > > Upgrading didn't help, now I show a gray face with a blue question mark. > Do > I need to open 5177 both ways? > > Also, if the im server is in a dmz do I put the firewall address in the > nat > gateway or the ip of the im server? > > -----Original Message----- > From: Fred Stover [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 25, 2003 2:57 PM > To: '[EMAIL PROTECTED]' > Subject: [IpswitchIM_Forum] NATing questions > > > I have IM working inside my company's firewall, all is working great, > had a > little nating problem but worked though them. > > Now, the final test: > > I have installed an IM server in a dmz zone which is where it will > finally > live, with the following setup: > > I opened port 5177 outbound and inbound into the dmz, and I'm connecting > to > the im server from inside the firewall. > > The test clients all show with a gray smiley face and I can't chat. > However, the chat messages are stored on the im server and will show the > next time a test client connects. > Here's the config: > > dns server inside the firewall pointing the im server in the dmz: > im.imany.com 172.16.200.7 > On the im server I have the 'nat gateway host' = im.imany.com > I have made the registry changes to the clients, prior to making them I > was > showing the blue questions mark. > > Any thoughts? > > Fred > > > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: > http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: > http://www.ipswitch.com/support/Instant_Messenger/index.asp > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: > http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: > http://www.ipswitch.com/support/Instant_Messenger/index.asp > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp
