Upgrading didn't help, now I show a gray face with a blue question mark. Do I need to open 5177 both ways?
Also, if the im server is in a dmz do I put the firewall address in the nat gateway or the ip of the im server? -----Original Message----- From: Fred Stover [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 25, 2003 2:57 PM To: '[EMAIL PROTECTED]' Subject: [IpswitchIM_Forum] NATing questions I have IM working inside my company's firewall, all is working great, had a little nating problem but worked though them. Now, the final test: I have installed an IM server in a dmz zone which is where it will finally live, with the following setup: I opened port 5177 outbound and inbound into the dmz, and I'm connecting to the im server from inside the firewall. The test clients all show with a gray smiley face and I can't chat. However, the chat messages are stored on the im server and will show the next time a test client connects. Here's the config: dns server inside the firewall pointing the im server in the dmz: im.imany.com 172.16.200.7 On the im server I have the 'nat gateway host' = im.imany.com I have made the registry changes to the clients, prior to making them I was showing the blue questions mark. Any thoughts? Fred To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/ipswitchim_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp
