Hi Marek, I don't think it will boot from iSCSI target. The tutorial you were following says about (...I have dedicated my time to figuring out a way to mount iSCSI targets under our custom WinPE v3.0 (Windows 7 Based) environment...) but not to boot from iSCSI target.
Maybe I miss a point... Regards, Slawek W dniu 13 marca 2012 23:51 użytkownik Marek Salwerowicz <[email protected]> napisał: > Hi list, > > I have a problem with trying to boot WinPE 3.0 (prepared according to: > http://www.gregorystrike.com/2010/01/08/winpe-v3-0-and-microsoft-iscsi-initiator/). > I've prepared it under Win7 Pro. > > I have downladed from git repository current tree, prepared the ISO image of > iPXE (under Debian Squeeze) > > I have set up the iSCSI target under FreeNAS > > After booting my machine from iPXE ISO image i type following commands: > > dhcp > set keep-san 1 > sanhook --drive 0x80 --no-describe > iscsi:192.168.146.132::::iqn.2012-01.local:win7disk > sanboot --drive 0x81 --no-describe http://10.0.0.1/path.to.WinPE.iso > > WinPE stops during boot and displays following message: > > File: \Boot\BCD > Status: 0xc000000e > Info: An error occurred while attempting to read the boot configuration > data. > > When I do not attach iSCSI target and only boot the WinPE iso file, > everything is OK, but (of course) I can't install Windows under my iSCSI > target. > > Does anyone have an idea what I am doing wrong? > > -- > Regards, > Marek Salwerowicz > > > > > _______________________________________________ > ipxe-devel mailing list > [email protected] > https://lists.ipxe.org/mailman/listinfo/ipxe-devel _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo/ipxe-devel
