Hi,
W dniu 2012-03-14 01:09, Slawomir Latkowski pisze:
Hi Marek,
I don't think it will boot from iSCSI target.
The tutorial you were following says about (...I have dedicated my
time to figuring out a way to mount iSCSI targets under our custom
WinPE v3.0 (Windows 7 Based) environment...) but not to boot from
iSCSI target.
As far as I know, sanboot allows to boot the Live-CD image (like my
WinPE ISO).
What's more, when I do not set iSCSI Target ( sanhook....) and ONLY boot
Live-CD, everything works.
--
Regards,
Marek Salwerowicz
Maybe I miss a point...
Regards,
Slawek
W dniu 13 marca 2012 23:51 użytkownik Marek Salwerowicz
<[email protected]> napisał:
Hi list,
I have a problem with trying to boot WinPE 3.0 (prepared according to:
http://www.gregorystrike.com/2010/01/08/winpe-v3-0-and-microsoft-iscsi-initiator/).
I've prepared it under Win7 Pro.
I have downladed from git repository current tree, prepared the ISO image of
iPXE (under Debian Squeeze)
I have set up the iSCSI target under FreeNAS
After booting my machine from iPXE ISO image i type following commands:
dhcp
set keep-san 1
sanhook --drive 0x80 --no-describe
iscsi:192.168.146.132::::iqn.2012-01.local:win7disk
sanboot --drive 0x81 --no-describe http://10.0.0.1/path.to.WinPE.iso
WinPE stops during boot and displays following message:
File: \Boot\BCD
Status: 0xc000000e
Info: An error occurred while attempting to read the boot configuration
data.
When I do not attach iSCSI target and only boot the WinPE iso file,
everything is OK, but (of course) I can't install Windows under my iSCSI
target.
Does anyone have an idea what I am doing wrong?
--
Regards,
Marek Salwerowicz
_______________________________________________
ipxe-devel mailing list
[email protected]
https://lists.ipxe.org/mailman/listinfo/ipxe-devel
_______________________________________________
ipxe-devel mailing list
[email protected]
https://lists.ipxe.org/mailman/listinfo/ipxe-devel
