Hi Marek! Am 01.08.2012 08:12, schrieb Marek Salwerowicz: > W dniu 2012-08-01 01:58, Michael Brown pisze: >> >> Try hooking the target disk as the default drive (0x80) and using >> --drive 0x81 >> for win2k8.iso, i.e.: >> >> sanhook iscsi:192.168.65.135::::iqn.2012--06.freenas.local:win2k8disk >> sanboot --no-describe --drive 0x81 http://ip/win2k8.iso > Doesn't work for me - the same error (\Boot\BCD, 0xc000000e) > > I found at Robin Smidsrod's git site (https://gist.github.com/2234639) > example with loading the ISO image via initrd/chain: > > :windows7-install > echo Starting Windows 7 x64 installer for ${initiator-iqn} > # Hook iSCSI drive > set root-path ${base-iscsi}:${hostname}.boot.windows7 > sanhook ${root-path} || goto failed > # Start Windows 7 installer DVD > sanboot --no-describe --drive 0x81 > http://boot.smidsrod.lan/windows-7/ultimate-x64.iso || goto failed > # Better solution, according to Oliver Rath on the mailing-list > # Requires massive amounts of RAM, though > #initrd http://boot.smidsrod.lan/windows-7/ultimate-x64.iso > #chain ../memdisk iso raw || goto failed > goto start but for me it doesn't work / I use it wrong (despite I > allocated 4GB of RAM to this VM, and image has about 3 GB): > > iPXE>sanhook iscsi:192.168.65.135::::iqn.2012-06.freenas.local:win2k8disk > Registered SAN device 0x80 > > iPXE>initrd http://192.168.65.134/w2k8.iso > http://192.168.65.134/w2k8.iso... 100% iPXE> chain ../memdisk iso raw > ../memdisk............ connection timed out (http://ipxe.org/4c126035) > iPXE> > > >
You will need a WinPE4 for installing win8 completely diskless. This will fit into RAM (~330MB), so you can offer the iSCSI-C: drive via 0x80 and the win8-iso as 0x81. Hth Oliver _______________________________________________ ipxe-devel mailing list [email protected] https://lists.ipxe.org/mailman/listinfo.cgi/ipxe-devel
