________________________________________ From: IRCA <[email protected]> on behalf of Guy Atkins <[email protected]> Sent: Wednesday, February 3, 2016 1:49 AM To: Mailing list for the International Radio Club of America Subject: [IRCA] Re: Wellbrook Large Aperture Loop Antenna ALA100LN
Guy: Did you test this with the DX Engineering phaser? It requires no tweaking of the phasing and I thought it would work at least as well or better than Wellbrook. <CLIP> The Wellbrook phaser works well with very little tweaking needed across the MW band, once phase and gain are set. Other phasers can work but will need readjustment every 100-200 kHz or so. Wellbrook's phaser is best for broadband SDR recording with a phased loop array. <CLIP> Guy Atkins Puyallup, WA > > > ---------- Forwarded message ---------- > From: "Paul B. Walker, Jr." <[email protected]> > To: Mailing list for the International Radio Club of America < > [email protected]> > Cc: "National Radio Club NRC am@nrcdxas_org" <[email protected]> > Date: Tue, 2 Feb 2016 14:20:52 -0900 > Subject: Re: [IRCA] Wellbrook Large Aperture Loop Antenna ALA100LN > Les, on Collin Newells recommendation I will be buying a Wellbrook loops > the ala100ln I think even.... You'll like it I think > > Paul > > _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected] _______________________________________________ IRCA mailing list [email protected] http://montreal.kotalampi.com/mailman/listinfo/irca Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers For more information: http://www.ircaonline.org To Post a message: [email protected]
