TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------

Ahhh...I thought you were running NT.  Anyway, I think that even with
Solaris, the sensor can only handle about 50% or maybe a bit more of total
bandwidth.  Basically, I would see if you are dropping packets and if so,
implement a Top Layer switch for load balancing.  It's a great tool and
seems to be working quite well here.  Hope that helped a bit.

Brian J. Bartholomew
U.S. Dept of State, Bureau of Diplomatic Security
Computer Incident Response Team
(202)663-2304

> -----Original Message-----
> From: Yong, David [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, September 06, 2001 6:17 PM
> To:   [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject:      RE: RealSecure only sees 40% of the traffic?
> 
> Sorry, somehow I think people took this statement:
> 
> > 5) Is this pertaining to NT as well as Solaris?  I have Sun boxes.
> 
> And thought that I meant I was using NT boxes as monitors, but could move
> it to Sun equipment.  That is NOT the case.  I am running Ultra 60's with
> qfe cards. Since it's a fast ethernet card, I would only expect it to keep
> up with 100mbs of traffic.  However, I am not sure that this is the case.
> I do not know how much of the traffic I am seeing is coming through.  
> 
> Basically my question boils down to this:
> Theoretically, if I have a fast ethernet card, and the traffic that is
> going by it is less than 100mbs, will my console get all the messages that
> it should?  Now of all the pieces between there, the card to the network
> sensor engine, the sensor engine to the event collector, and from the
> event collector to the console, which one is only getting 40% done?  And
> is there at least some kind of counter to see how many packets are
> dropped?  Where did this 40% come from and is it accurate?
> 
> NT doesn't come into play until after the packets are processed, and it's
> packet capturing engine is terrible, so I wouldn't ever use it for a
> sensor.
> 
> -----Original Message-----
> From: Bartholomew, Brian J [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 06, 2001 4:32 AM
> To: Yong, David; [EMAIL PROTECTED]
> Subject: RE: RealSecure only sees 40% of the traffic?
> 
> 
> 
> TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
> to
> [EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
> problems!
> --------------------------------------------------------------------------
> --
> 
> David,
>       My experience...I have seen that on an NT box, Real Secure can only
> handle 40-50% of your bandwidth before it starts dropping packets.  I
> don't
> know if this is what you're looking for, but that's all I can say for
> sure.
> 
> Brian J. Bartholomew
> U.S. Dept of State, Bureau of Diplomatic Security
> Computer Incident Response Team
> (202)663-2304
> 
> > -----Original Message-----
> > From:       Yong, David [SMTP:[EMAIL PROTECTED]]
> > Sent:       Wednesday, September 05, 2001 12:55 PM
> > To: [EMAIL PROTECTED]
> > Subject:    RealSecure only sees 40% of the traffic?
> > 
> > 
> > TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
> > to
> > [EMAIL PROTECTED]  Contact [EMAIL PROTECTED] for help with any
> > problems!
> >
> --------------------------------------------------------------------------
> > --
> > 
> > I heard somewhere that an ISS RealSecure network sensor only gets 40% of
> > the traffic that is going by it.  What I want to know is:
> > 
> > 1) Is the sensor only recieving 40% of the traffic that is being
> captured
> > by the card?
> > 
> > 2) Is the sensor only processing 40% of the traffic that it recieves?
> > 
> > 3) Is this an antiquated statement made back when packet loss was super
> > high because of the cards?
> > 
> > 4) Is this because of how the routers/switches mirror the traffic?
> > 
> > 5) Is this pertaining to NT as well as Solaris?  I have Sun boxes.
> > 
> > 6) Can I tell what percentage of the traffic I am not getting on the
> > sensor?  (Like a sniffer will tell me how many packets were dropped)
> > 
> > Can anyone explain this statement in detail?  Please don't say "All of
> the
> > above", because that's copping out.
> > 
> > David Yong
> > (310) 812-3994
> > 
> > 


Reply via email to