TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
Hi David
What version of Solaris are you running? There are performance related
problems with respect to trying to get a Solaris box to monitor a 100Mb
network. Yes you have a 100Mb capable card but in practice that only means
it can negotiate with your properly with your switch. The real problem is
ripping a frame off the qfe card and into memory efficiently and then
processing it quickly.
Solaris 2.6 would have no hope. I played with it using NFR a couple of
years ago now with an Ultra 5 (not exactly a race horse) on a network that
was peaking at around 6Mb/s and had some packet loss. I spoke to Casper Dik
(Sun Eng from Holland) as he had written some improved (i.e. far more
efficient) streams drivers for Sol 2.6 and Sol 7 that he was hoping might
have been included in the Sol 7 code base. I am fairly sure that they
weren't so I don't have any expectation that Sol 7 is any more capable in
this regard (the code might still be around).
If you examine network throughput tests such as those you can do with
"netperf" you will certainly find that a pair of Suns with qfe cards will be
capable of moving traffic at something like 92Mb/s but in all these tests
there is no processing of data by the receiver and that is where the
difference lies.
I'll try to find some more concrete stuff for you rather than my gossip and
innuendo :-)
-Cameron
Cameron Humphries
Enterprise IT Security Engineer
iSecure
(a division of SecureNet Ltd)
+61 2 6268 9222
-----Original Message-----
From: Yong, David
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: 9/7/2001 8:17 AM
Subject: RE: RealSecure only sees 40% of the traffic?
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
------------------------------------------------------------------------
----
Sorry, somehow I think people took this statement:
> 5) Is this pertaining to NT as well as Solaris? I have Sun boxes.
And thought that I meant I was using NT boxes as monitors, but could
move it to Sun equipment. That is NOT the case. I am running Ultra
60's with qfe cards. Since it's a fast ethernet card, I would only
expect it to keep up with 100mbs of traffic. However, I am not sure
that this is the case. I do not know how much of the traffic I am
seeing is coming through.
Basically my question boils down to this:
Theoretically, if I have a fast ethernet card, and the traffic that is
going by it is less than 100mbs, will my console get all the messages
that it should? Now of all the pieces between there, the card to the
network sensor engine, the sensor engine to the event collector, and
from the event collector to the console, which one is only getting 40%
done? And is there at least some kind of counter to see how many
packets are dropped? Where did this 40% come from and is it accurate?
NT doesn't come into play until after the packets are processed, and
it's packet capturing engine is terrible, so I wouldn't ever use it for
a sensor.
-----Original Message-----
From: Bartholomew, Brian J [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 06, 2001 4:32 AM
To: Yong, David; [EMAIL PROTECTED]
Subject: RE: RealSecure only sees 40% of the traffic?
TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
problems!
------------------------------------------------------------------------
----
David,
My experience...I have seen that on an NT box, Real Secure can
only
handle 40-50% of your bandwidth before it starts dropping packets. I
don't
know if this is what you're looking for, but that's all I can say for
sure.
Brian J. Bartholomew
U.S. Dept of State, Bureau of Diplomatic Security
Computer Incident Response Team
(202)663-2304
> -----Original Message-----
> From: Yong, David [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, September 05, 2001 12:55 PM
> To: [EMAIL PROTECTED]
> Subject: RealSecure only sees 40% of the traffic?
>
>
> TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your
message
> to
> [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
> problems!
>
------------------------------------------------------------------------
--
> --
>
> I heard somewhere that an ISS RealSecure network sensor only gets 40%
of
> the traffic that is going by it. What I want to know is:
>
> 1) Is the sensor only recieving 40% of the traffic that is being
captured
> by the card?
>
> 2) Is the sensor only processing 40% of the traffic that it recieves?
>
> 3) Is this an antiquated statement made back when packet loss was
super
> high because of the cards?
>
> 4) Is this because of how the routers/switches mirror the traffic?
>
> 5) Is this pertaining to NT as well as Solaris? I have Sun boxes.
>
> 6) Can I tell what percentage of the traffic I am not getting on the
> sensor? (Like a sniffer will tell me how many packets were dropped)
>
> Can anyone explain this statement in detail? Please don't say "All of
the
> above", because that's copping out.
>
> David Yong
> (310) 812-3994
>
>