TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message to
[EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any problems!
----------------------------------------------------------------------------
You can read more about rskill in the iss knowledgebase...here's the web
site that talks about it...
https://iss.custhelp.com/cgi-bin/iss.cfg/php/enduser/std_adp.php?p_sid=Wl7Gu
QW&p_lva=&p_refno=001215-000000&p_created=976872224&p_sp=cF9ncmlkc29ydD0mcF9
yb3dfY250PTEmcF9zZWFyY2hfdGV4dD1yc2tpbGwmcF9zZWFyY2hfdHlwZT0zJnBfcHJvZF9sdmw
xPX5hbnl_JnBfcHJvZF9sdmwyPX5hbnl_JnBfY2F0X2x2bDE9fmFueX4mcF9jYXRfbHZsMj1_YW5
5fiZwX3NvcnRfYnk9ZGZsdCZwX3BhZ2U9MQ**&p_li=
It says that it can't be used to terminate ICMP or UDP based
traffic, along with portscans. Also, with code red, I believe that, but can
be wrong, that rskill works with packets over 1024 in length, whereas in
code red, the packet was 80 bytes? I could be totally wrong, but when I
talked with tech support at ISS, they basically told me code red couldn't be
killed because the packets were too small...
Mike
-------------------------------------------------
Mike Wisniewski
Computer Network Associate
- ISS Certified -
Argonne National Laboratory
Electronics and Computing Technologies
630-252-7560
-----Original Message-----
From: Crivianu, Iosif [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 10, 2001 10:14 AM
To: 'Wisniewski, Michael'; 'Yong, David'; '[EMAIL PROTECTED]';
'[EMAIL PROTECTED]'
Subject: RE: RealSecure only sees 40% of the traffic?
Maybe you can give as a definition for "too small". But Code Red was "too
small"? I tried to RSKILL the Unicode vulnerability, and a mail with a
subject contains testtesttest
Regards
Iosif Crivianu
> -----Original Message-----
> From: Wisniewski, Michael [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, September 10, 2001 10:13 AM
> To: 'Crivianu, Iosif'; 'Yong, David'; '[EMAIL PROTECTED]';
> '[EMAIL PROTECTED]'
> Subject: RE: RealSecure only sees 40% of the traffic?
>
>
> With RSKILLS, from my understanding, if the packet is too small, it
> will not kill it. At least that's what my lesson that was learned from
> code
> red worm!
>
>
> mike
>
>
> -------------------------------------------------
> Mike Wisniewski
> Computer Network Associate
> - ISS Certified -
> Argonne National Laboratory
> Electronics and Computing Technologies
> 630-252-7560
>
>
>
> -----Original Message-----
> From: Crivianu, Iosif [mailto:[EMAIL PROTECTED]]
> Sent: Friday, September 07, 2001 8:57 AM
> To: 'Yong, David'; [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: RE: RealSecure only sees 40% of the traffic?
>
>
> TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
> to
> [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
> problems!
> --------------------------------------------------------------------------
> --
>
> I don't know were is the problem like you say in NIC or maybe in software
> ?!?. I have in production Network Sensors (NT) version 5, in switch and
> hub.
> I just install in a new machine with Win 2000 the new Network sensor
> version
> 6, move in production, switching the cable from the old sensor to the new
> one... the result... I can not use rskill. So where is the problem in NIC,
> no, I already change it and the same result. And I m not dealing with 1
> Gig
> of traffic...
>
> Iosif Crivianu
>
>
> > -----Original Message-----
> > From: Yong, David [SMTP:[EMAIL PROTECTED]]
> > Sent: Wednesday, September 05, 2001 5:16 PM
> > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> > Subject: RE: RealSecure only sees 40% of the traffic?
> >
> >
> > TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your message
> > to
> > [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
> > problems!
> >
> --------------------------------------------------------------------------
> > --
> >
> > Thank you Steve,
> >
> > I do appreciate the information. And I think most people are aware of
> the
> > problem. My questions however are more focused on why does this occur,
> > and where in the chain does it occur? Is the card giving the packets to
> > RS, and RS is losing 60% of them, or is it only sending 60% of the
> packets
> > to the console, or what? I also would like to get feedback on trying to
> > figure out how much exactly are we missing. It seems reasonable to me
> > that when a NIC card can tell me how many packets I am dropping, I
> should
> > also be able to tell from the sensor how many packets it's not recieving
> > or analyzing.
> >
> > There are claims by other vendors that they can do 1gig on a single box.
> > If the problem lies with the card, or the mirroring process, then the
> > claims don't do us any good even if we were to switch. Not that we're
> > ready to do something drastic like that, ISS still has the best
> signature
> > database and upkeep on that database. I just want to locate the problem
> > to see how we can get what we want out of RS.
> >
> > Thanks again Steve.
> >
> > -----Original Message-----
> > From: Marchal, Steve [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, September 05, 2001 12:15 PM
> > To: Yong, David; [EMAIL PROTECTED]
> > Subject: RE: RealSecure only sees 40% of the traffic?
> >
> >
> > Hi David-
> >
> > I have read and been told myself that RealSecure Network Sensors can
> catch
> > even less than 30% of the traffic on a high volume network. That is one
> of
> > the reasons ISS has teamed up with Top Layer so you can run multiple
> > network
> > sensors on a single switch. I sat through a sales seminar in Louisville,
> > KY
> > back in November 2000 where the Top Layer rep claim they could do a full
> > gig
> > of traffic with 9 RealSecure network sensors and 1 Top Layer switch.
> >
> > The July 2001 issue of Info Security Magazine rated IDS systems and the
> > major knock against RealSecure was 'poor performer under load'. The
> > Editorial note of this review said 'The company (ISS) promises that the
> > forthcoming version 6.5 will give dramatic performance improvements'.
> >
> > So it appears this is no big secret and ISS is aware and working to
> solve
> > this issue.
> >
> > Regards,
> >
> > Steven Marchal
> > Security Specialist
> > ATS NTC
> > 319.896.6949
> > [EMAIL PROTECTED]
> >
> > > -----Original Message-----
> > > From: Yong, David [SMTP:[EMAIL PROTECTED]]
> > > Sent: Wednesday, September 05, 2001 11:55 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: RealSecure only sees 40% of the traffic?
> > >
> > >
> > > TO UNSUBSCRIBE: email "unsubscribe issforum" in the body of your
> message
> > > to
> > > [EMAIL PROTECTED] Contact [EMAIL PROTECTED] for help with any
> > > problems!
> > >
> >
> --------------------------------------------------------------------------
> > > --
> > >
> > > I heard somewhere that an ISS RealSecure network sensor only gets 40%
> of
> > > the traffic that is going by it. What I want to know is:
> > >
> > > 1) Is the sensor only recieving 40% of the traffic that is being
> > captured
> > > by the card?
> > >
> > > 2) Is the sensor only processing 40% of the traffic that it recieves?
> > >
> > > 3) Is this an antiquated statement made back when packet loss was
> super
> > > high because of the cards?
> > >
> > > 4) Is this because of how the routers/switches mirror the traffic?
> > >
> > > 5) Is this pertaining to NT as well as Solaris? I have Sun boxes.
> > >
> > > 6) Can I tell what percentage of the traffic I am not getting on the
> > > sensor? (Like a sniffer will tell me how many packets were dropped)
> > >
> > > Can anyone explain this statement in detail? Please don't say "All of
> > the
> > > above", because that's copping out.
> > >
> > > David Yong
> > > (310) 812-3994
> > >
> > >
> >