RE: [ISSForum] Internet Scanner

[Wassim Nakadi]

This has to do with "Key administrator issue". The following are from the SiteProtector SP1.1 readme file, hope it might help you     You can monitor and control the Internet Scanner sensor using the    SiteProtector Console or the Internet Scanner Console. The first    console that connects to an Internet Scanner sensor becomes its    key administrator.    If you plan to use both consoles to monitor and control the    Internet Scanner sensor, the following scenarios exist:    - If the Internet Scanner Console connects first, you must use the      Public Key Configurator before SiteProtector can connect to the      Internet Scanner sensor.    - If the SiteProtector Console connects first you can connect to      the Internet Scanner sensor without using the Public Key      Configurator.    You can find the Public Key Configurator on the Deployment Manager.    Do not run the SiteProtector Console while you are using the    Public Key Configurator. -----Original Message----- From: bojidar_tzendov [mailto:[EMAIL PROTECTED] Sent: Thursday, May 29, 2003 4:37 PM To: [EMAIL PROTECTED] Subject: [ISSForum] Internet Scanner Hi,     I have installed SP 2.0. It is working ok with the Network Sensor. I installed IS 6.2.1 on another machine and Internet Scanner Data Bridge. I have applied IS license key on SP Console and IS directory both.   Scanner DataBridge sensor status on SP Console is active. I can start scans from IS interface and I can see the result on SP Console.   But when I am trying to start a scan from SP Console I get a message “Cannot sent iss.key license file to Intranet Scanner…”   Do you have any suggestions?     Regards, Bojidar       Bojidar Tzendov mobile: +359 88 605 365 phone: +359 2 969 60 60 fax: +359 2 969 60 69