Hi,
Maybe Emrah experiences a similar problem with downloaded XPU's as I am (in my case with Internet Scanner 6.2.1 XPU's, though). When I download XPU's using our corporate Internet facility (internal network connected to Internet using a proxy-server, guarded by eSafe etc.etc.) they were refused by the XPU-update-facility of my ISS-program. Downloading them on a separate machine, using a modem to get them, solved my (weird, not yet thorouly looked into) problem. (The files I downloaded through the Internet-gateway are, however, significantly smaller then those downloaded by modem; nevertheless, in both cases MS-IE had reported a succesful download). This happened on 3 separate downloads, so I don't think it was a coincidence. Downloading XPU's by modem might help Emrah, too. Regards, Dirk Vijver. -----Oorspronkelijk bericht----- Van: Paul Van Gurp [mailto:[EMAIL PROTECTED] Paul Van Gurp Verzonden: maandag 22 september 2003 18:35 Aan: Nicholas EK Ng; Emrah Alpa; [EMAIL PROTECTED] Onderwerp: RE: [ISSForum] "Network Sensor XPU 20.19" can not be installed Some things to consider... Has your browser added a .zip extension to the files? Have you paid your annual maintenance? Is it expired? Have you applied the latest licence key? -----Original Message----- From: Nicholas EK Ng [mailto:[EMAIL PROTECTED] Sent: Monday, September 22, 2003 10:13 AM To: 'Emrah Alpa'; [EMAIL PROTECTED] Subject: RE: [ISSForum] "Network Sensor XPU 20.19" can not be installed Try the "XPU uninstall" to uninstall the last update, then apply the 20.19 again. Hope this helps. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Emrah Alpa Sent: Thursday, August 21, 2003 6:55 AM To: [EMAIL PROTECTED] Subject: [ISSForum] "Network Sensor XPU 20.19" can not be installed Hi all, I can't update my RealSecure Network Sensors to the latest Network Sensor XPU 20.19. When I perform the usual XPU method, the update fails with a "No X-Press update packages were found at the specified location." error. Here's the step-by-step breakdown of the error: 1. I download these 2 files, from ISS: RSNetSnsr70_MU_20_19.xpu and RSNetSnsr70_MU_20_19.ini 2. From Console, I right-click the Network Sensor, and select "X-Press or product update". 3. I select "Local drive or network share", and point to the correct folder, and enable "X-Press Update". 4. After I click NEXT, the installer searches for updates, and after 2 seconds, displays the message "No X-Press update packages were found at the specified location.". As expected, I can't go any further, as the "NEXT" button is greyed out. Could there be a packaging issue with the Network Sensor XPU 20.19? I tried the following, but none helped: 1. Made sure, the "RSNetSnsr70_MU_20_19.xpu" file did not have a ".ZIP" extension. 2. Downloaded the file from another computer, to bypass connectivity/IE cache problems. 3. Rebooted the Console box. My environment is based on W2K Standard Server boxes, with SP3 and all latest hotfixes: RealSecure Workgroup Manager 6.7 (6.7.2003.109) SP1 Event Collector 6.5.2003.34 (SR 1.5) RealSecure Network Sensor 7.0.2002.155 (MU 20.18) Any help appreciated. Thanks, Emrah Alpa _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo ================================================ De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================ The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. _______________________________________________ ISSForum mailing list [EMAIL PROTECTED] TO UNSUBSCRIBE OR CHANGE YOUR SUBSCRIPTION, go to https://atla-mm1.iss.net/mailman/listinfo
