Hi ,
I am using a USB based touch screen LCD for TIZEN on NDiS 166 board.
But the touch input is not working with this board.
I came across many bugs raised in TIZEN bug site, but they are mostly for
touch calibration.
In my case the touch screen is detected by the kernel but "xinput list"
doesnt list my touch screen device at all. Below are dmesg and xinput list
logs ....
I am using TIZEN 2.0 release.
*DMESG*
[ 12.703678] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 21.528514] composite sync not supported
[ 884.484925] usb 2-1.1: USB disconnect, device number 3
[ 885.940235] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
[ 886.020179] usb 2-1.1: New USB device found, idVendor=0eef,
idProduct=0001
[ 886.020184] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 886.020188] usb 2-1.1: Product: USB TouchController
[ 886.020191] usb 2-1.1: Manufacturer: eGalax Inc.
[ 886.022735] input: eGalax Inc. USB TouchController as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
*-sh-4.1# xinput list*
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer
(2)]
⎜ ↳ SEJIN SEJIN USB Mini Trackball Keyboard id=11 [slave pointer
(2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard
(3)]
↳ SEJIN SEJIN USB Mini Trackball Keyboard id=10 [slave keyboard
(3)]
∼ Power Button id=6 [floating slave]
∼ Video Bus id=7 [floating slave]
∼ Power Button id=8 [floating slave]
∼ Microsoft LifeCam VX-800 id=9 [floating slave]
*#cat /dev/input/mouse1
)9� � � � � � � *
Thanks and Regards,
Prabhuram M
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
