This has been fixed in Tizen IVI 3.0  
https://bugs.tizen.org/jira/i#browse/TIVI-1086

You might want to look at these patches:

https://bugs.freedesktop.org/show_bug.cgi?id=54428


https://review.tizen.org/gerrit/#/c/6047/

with the fix the touchscreen is no longer recognized as a mouse device.

Regards
Joel


From: [email protected] [mailto:[email protected]] On 
Behalf Of Prabhuram Murugan
Sent: Thursday, September 05, 2013 5:38 AM
To: IVI Tizen
Subject: egalax touch screen not detected by X

Hi ,
I am using a USB based touch screen LCD for TIZEN on NDiS 166 board.
But the touch input is not working with this board.
I came across many bugs raised in TIZEN bug site, but they are mostly for touch 
calibration.
In my case the touch screen is detected by the kernel but "xinput list" doesnt 
list my touch screen device at all. Below are dmesg and xinput list logs ....
I am using TIZEN 2.0 release.

DMESG

[   12.703678] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.528514] composite sync not supported
[  884.484925] usb 2-1.1: USB disconnect, device number 3
[  885.940235] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
[  886.020179] usb 2-1.1: New USB device found, idVendor=0eef, idProduct=0001
[  886.020184] usb 2-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[  886.020188] usb 2-1.1: Product: USB TouchController
[  886.020191] usb 2-1.1: Manufacturer: eGalax Inc.
[  886.022735] input: eGalax Inc. USB TouchController as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9

-sh-4.1# xinput list
⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ SEJIN SEJIN USB Mini Trackball Keyboard     id=11    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ SEJIN SEJIN USB Mini Trackball Keyboard     id=10    [slave  keyboard (3)]
∼ Power Button                                id=6    [floating slave]
∼ Video Bus                                   id=7    [floating slave]
∼ Power Button                                id=8    [floating slave]
∼ Microsoft LifeCam VX-800                    id=9    [floating slave]

#cat /dev/input/mouse1

)9� � � � � � �

Thanks and Regards,
Prabhuram M
_______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi

Reply via email to