Hi There, I'm new to Tizen IVI. I am trying to enable Tizen IVI 3.0 on my Nexcom NDiS166 box. I was able to boot up with the image, but not with the GUI screen. Need any advice on what I should do.
Here's what I did: Download image from download.tizen.org: http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20131011.2/images/ivi-release-mbr-i586/tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2<http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20131011.2/images/ivi-release-mbr-i586/tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2> For installing the image, I did the following: * Copy the image on an USB drive, which as a Fedora bootable * Boot to Fedora via the USB drive * Execute the following to burn the image on the hard drive directly bzcat tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2 | dd of=/dev/sda bs=4M When I booted up the system from the hard drive, I saw the GUI screen appeared, and disappeared quickly. Then the system went back to black screen with the following text: [ 2.502921] systemd[1]: Job smack-default-labeling.service/start deleted to break ordering cycle starting with basic.target/start System-fsck[74]: platform: clean, 20444/240000 files, 216091/959488 blocks [ 2.660231] hub 2-1:1.0: over-current condition on port 7 [ 2.862094] hub 2-1:1.0: over-current condition on port 8 I can login to the system via a console, through Ctrl+Alt+F2. But the GUI screen is nowhere to be found. Is there something wrong with the partitions? Any suggestion on what I did wrong? I succeeded in installing the Aug29 image on the same NDiS166 box in the past. System booted to Wayland. Thanks, Meiyuan
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
