2013/10/21 Zhao, Meiyuan <[email protected]> > Hi There,**** > > ** ** > > I’m new to Tizen IVI. I am trying to enable Tizen IVI 3.0 on my Nexcom > NDiS166 box. I was able to boot up with the image, but not with the GUI > screen. Need any advice on what I should do. **** > > ** ** > > Here’s what I did:**** > > ** ** > > Download image from download.tizen.org:**** > > http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20131011.2/images/ivi-release-mbr-i586/tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2 > > <http://download.tizen.org/releases/milestone/tizen/ivi/tizen_20131011.2/images/ivi-release-mbr-i586/tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2> > **** > > ** ** > > For installing the image, I did the following:**** > > **· **Copy the image on an USB drive, which as a Fedora bootable*** > * > > **· **Boot to Fedora via the USB drive**** > > **· **Execute the following to burn the image on the hard drive > directly**** > > bzcat tizen_20131011.2_ivi-release-mbr-i586-sdb.raw.bz2 | dd of=/dev/sda > bs=4M**** > > ** ** > > When I booted up the system from the hard drive, I saw the GUI screen > appeared, and disappeared quickly. Then the system went back to black > screen with the following text:**** > > ** ** > > [ 2.502921] systemd[1]: Job smack-default-labeling.service/start > deleted to break ordering cycle starting with basic.target/start**** > > System-fsck[74]: platform: clean, 20444/240000 files, 216091/959488 blocks > **** > > [ 2.660231] hub 2-1:1.0: over-current condition on port 7**** > > [ 2.862094] hub 2-1:1.0: over-current condition on port 8**** > > ** ** > > I can login to the system via a console, through Ctrl+Alt+F2. But the GUI > screen is nowhere to be found. Is there something wrong with the > partitions? Any suggestion on what I did wrong? **** > > ** ** > > I succeeded in installing the Aug29 image on the same NDiS166 box in the > past. System booted to Wayland.**** > > ** ** > > Thanks,**** > > Meiyuan**** > > _______________________________________________ > IVI mailing list > [email protected] > https://lists.tizen.org/listinfo/ivi > > Hi, Check if you have correct configuration in /etc/xdg/weston/weston.ini
If you use standard VGA display output section should look like following: [output] name=VGA1 **** transform=90**** #mode=off # if you are using VTC7KDK+VGA, please also add these lines:**** [output]**** name=LVDS1 **** mode=off -- regards / pozdrawiam, Tomasz Olszak Qt for Tizen | http://qt-project.org/wiki/Tizen Qt Certified Developer | http://qt-project.org http://linkedin.com/in/tolszak
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
