Already tried set the 'boot" flag, as my previous post, but the parted tool i used do not show"legacy_boot" flag. and still not work even 'boot' flag set on my pc!
================== sudo parted /dev/sdb GNU Parted 2.3 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: TOSHIBA TransMemory (scsi) Disk /dev/sdb: 7803MB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 68.1MB 67.1MB ext4 primary boot 2 68.2MB 3998MB 3930MB ext4 primary On Thu, Nov 7, 2013 at 12:26 PM, Artem Bityutskiy < [email protected]> wrote: > On Wed, 2013-11-06 at 22:16 +0800, Baodong Chen wrote: > > I just tried the usb stick on another pc(lenovo E430), This time it > > DID boot.... > > > > So the image is good..... > > > > > > it's my pc's problem!!! > > > > does anyone know how to fix this, can update bios firmware fix this ? > > Could you please still try was suggested here. Set the 'boot' flag, in > addition to 'legacy_boot', and check if it helps. > > -- > Best Regards, > Artem Bityutskiy > >
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
