Hi, My hardware platform and version are like this;
Nexcom VTC 1010 Bios Firmware MV11A119.rom Tizen IVI Image : tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2 <http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2> I boot the system with a USB stick with SysrescueLinux. Also I copied the Tizen IVI-3.0 image to USB stick. I successfully write the Tizen IVI-3.0 image to the harddrive on this hardware platform with this command # bzcat tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2 <http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2> | dd of=/dev/sda bs=512k oflag=sync conv=sparse After that I sync the filesystem and list the available partitions on the harddrive with fdisk -l command. it shows that there are two partitions on it. /dev/sda1 EFI /dev/sda2 Microsoft ... When I reboot the system and set the default boot to the harddrive, the system cannot boot from the Tizen IVI image partition I've created before. What can be the problem behind this ? Best, Bugra
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
