If you have a gpt partition table, you might have to use gdisk from a terminal to set the attributes on the boot partition.
for example: gdisk /dev/sda x (expert) a (attributes) select partition 1 and then make it bootable. I also relocate the backup to the end of the disk. Hope that helps. MICHAEL JOHNSON Embedded Software Engineer Tel. +441962868866 | Winchester, United Kingdom | Twitter<https://twitter.com/symphony_teleca> [www.symphonyteleca.com]<http://www.symphonyteleca.com> Teleca Limited, a company registered in England & Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. ________________________________ From: IVI [[email protected]] on behalf of Hofemeier, Ulf [[email protected]] Sent: 04 February 2015 7:21 PM To: Bugra Cakir; [email protected] Subject: Re: [IVI] Tizen IVI-3.0 Image Boot Problem Please try to decompress the bzip2 image to stdout using bzcat –dc image.bz2 | dd of=/dev/sda. Thanks, Ulf From: IVI [mailto:[email protected]] On Behalf Of Bugra Cakir Sent: Wednesday, February 04, 2015 11:18 AM To: [email protected] Subject: [IVI] Tizen IVI-3.0 Image Boot Problem Hi, My hardware platform and version are like this; Nexcom VTC 1010 Bios Firmware MV11A119.rom Tizen IVI Image : tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2<http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2> I boot the system with a USB stick with SysrescueLinux. Also I copied the Tizen IVI-3.0 image to USB stick. I successfully write the Tizen IVI-3.0 image to the harddrive on this hardware platform with this command # bzcat tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2<http://download.tizen.org/releases/milestone/tizen/ivi-3.0/tizen-3.0-ivi_20150201.3/images/atom64/ivi-efi-x86_64/tizen-3.0-ivi_20150201.3_ivi-efi-x86_64-sdb.raw.bz2> | dd of=/dev/sda bs=512k oflag=sync conv=sparse After that I sync the filesystem and list the available partitions on the harddrive with fdisk -l command. it shows that there are two partitions on it. /dev/sda1 EFI /dev/sda2 Microsoft ... When I reboot the system and set the default boot to the harddrive, the system cannot boot from the Tizen IVI image partition I've created before. What can be the problem behind this ? Best, Bugra
_______________________________________________ IVI mailing list [email protected] https://lists.tizen.org/listinfo/ivi
