On Saturday 26 November 2005 20:49, Sigurd Nes wrote:
> Hans Verkuil wrote:
> > Hi all,
> >
> > Please test this preliminary 0.4.1 release! Download from:
> >
> > http://ivtvdriver.org/viewcvs/ivtv/branches/0.4.tar.gz?view=tar
> >
> > If there are no new major problems then I want to release it next
> > week. I'd like to hear both successes and failures. Especially if
> > you are running a 2.4 kernel!
> >
> > Note that the firmware files are now using the hotplug mechanism
> > (except for older 2.4 kernels). See
> > http://www.ivtvdriver.org/index.php/Firmware for more information.
> >
> > Thanks,
> >
> > Hans
>
> Everything seems to initialize just fine - but the tuners of the 500
> only gives me a short burst of static. the 350 is fine.
Static video, static audio or both? What shows up in the kernel log
after running 'ivtvctl -d /dev/videoX --log-status' (replace videoX
with a video device of the PVR500)?
I am unable to reproduce this. I tried the 2.6.13.4 kernel, I have the
same PVR500, and I have no problems.
As far as I can tell from the ivtv log everything works fine and is
installed correctly.
I believe you said it worked correctly in the past. If so, can you go
back through the various revisions and try to locate where it broke?
Recommended revisions to try are: 2950, 2961 and 2966.
You'll have to help me here!
Hans
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
