|
Hi, My machine has 4 of 3 different cards (MPG600,PVR250,5000TVs) which work fine with ivtv-0.2.0-rc3e-paken patched driver previously. Today I upgrade the box to ivtv-0.6.1 and kernel 2.6.16 and the driver does not load correctly. Anything I missed? Thanks, Andy Here is the dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.1 (tagged release) loading ivtv: Linux version: 2.6.16 SMP preempt gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Yuan MPG600/Kuroutoshikou ITVC16-STVLP card (cx23416 based) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 193 saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0060: type set to 53 (Philips FQ1286) ivtv0: Initialized Yuan MPG600/Kuroutoshikou ITVC16-STVLP, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 177 saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 48011, rev F610, serial# 5193997 tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP3435 (idx 10) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has no radio, has IR remote msp3400: Unknown parameter `simpler' ivtv1: Failed to load module msp3400 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv1: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv1: i2c addr 0x40 not found for command 0x40086d11! ivtv1: i2c addr 0x40 not found for command 0xc008561c! ivtv1: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv1: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv1: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Nagase Transgear 5000TV card (cx23416 based) ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 201 saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #2) tuner 3-0060: All bytes are equal. It is not a TEA5767 tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #2) tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #2) ivtv2: Failed to load module upd64031a ivtv2: Failed to load module upd64083 ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv2: Encoder revision: 0x02050032 ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 3-0060: type set to 53 (Philips FQ1286) ivtv2: i2c addr 0x12 not found for command 0xc0045627! ivtv2: i2c addr 0x5c not found for command 0xc0045627! ivtv2: Initialized Nagase Transgear 5000TV, card #2 ivtv: ====================== NEXT CARD ====================== ivtv3: Autodetected Nagase Transgear 5000TV card (cx23416 based) ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 225 saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c driver #3) tuner 4-0060: All bytes are equal. It is not a TEA5767 tuner 4-0060: chip found @ 0xc0 (ivtv i2c driver #3) tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #3) ivtv3: Failed to load module upd64031a ivtv3: Failed to load module upd64083 ivtv3: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv3: Encoder revision: 0x02050032 ivtv3: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv3: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv3: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv3: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 4-0060: type set to 53 (Philips FQ1286) ivtv3: i2c addr 0x12 not found for command 0xc0045627! ivtv3: i2c addr 0x5c not found for command 0xc0045627! ivtv3: Initialized Nagase Transgear 5000TV, card #3 ivtv: ==================== END INIT IVTV ==================== |
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
