Hans Verkuil wrote: >Hi Andy, > >First a quick note before I answer your questions: please don't post >html messages here, use plain ASCII. It makes life easier for the rest >of us. Thanks. > > > Sorry...
>> msp3400: Unknown parameter `simpler' >> >> >^^^^^^^^^^^^^ >Don't use any module options with msp3400. In fact, you rarely if ever >need module options anymore with ivtv-0.4.x and up. msp3400 no longer >recognizes this option and so will fail to load, hence leading to the >other errors. > > > It seems harmless, but OK I fix it now. >> ivtv2: Failed to load module upd64031a >> ivtv2: Failed to load module upd64083 >> >> >^^^^^^^^^^^^^ >These modules should have been build and installed. Can you check if >they are installed to the correct place? There is also an outside >chance that you need to run 'depmod' first. > > Hans > > Yes, you are right. I did not notice the "i2c-drivers" directory so that those are not built. Now it loads correctly as listed at the end, but I got error from Mythtv as well as Andrew did in the other thread. 2006-03-26 05:26:08.938 TVRec(4): Changing from None to WatchingLiveTV Error setting codec params VIDIOC_S_CTRL:: Invalid argument Thanks, Andy ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.1 (tagged release) loading ivtv: Linux version: 2.6.16 SMP preempt gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Yuan MPG600/Kuroutoshikou ITVC16-STVLP card (cx23416 based) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 193 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) hald[4016]: segfault at 0000000000000000 rip 00002b0cca3baed0 rsp 00007fffffddc5c8 error 4 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0060: type set to 17 (Philips NTSC_M (MK2)) ivtv0: Initialized Yuan MPG600/Kuroutoshikou ITVC16-STVLP, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 177 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 48011, rev F610, serial# 5193997 tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP3435 (idx 10) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has no radio, has IR remote msp3400 2-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #1) msp3400 2-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Nagase Transgear 5000TV card (cx23416 based) ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 23 (level, low) -> IRQ 201 ivtv2: Unreasonably low latency timer, setting to 64 (was 32) tuner 3-0060: All bytes are equal. It is not a TEA5767 tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #2) tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #2) saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #2) upd64031a 3-0012: chip found @ 0x24 (ivtv i2c driver #2) upd64083 3-005c: chip found @ 0xb8 (ivtv i2c driver #2) ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv2: Encoder revision: 0x02050032 ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 3-0060: type set to 53 (Philips FQ1286) ivtv2: Initialized Nagase Transgear 5000TV, card #2 ivtv: ====================== NEXT CARD ====================== ivtv3: Autodetected Nagase Transgear 5000TV card (cx23416 based) GSI 23 sharing vector 0xE1 and IRQ 23 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 225 ivtv3: Unreasonably low latency timer, setting to 64 (was 32) tuner 4-0060: All bytes are equal. It is not a TEA5767 tuner 4-0060: chip found @ 0xc0 (ivtv i2c driver #3) tda9887 4-0043: chip found @ 0x86 (ivtv i2c driver #3) saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c driver #3) upd64031a 4-0012: chip found @ 0x24 (ivtv i2c driver #3) upd64083 4-005c: chip found @ 0xb8 (ivtv i2c driver #3) ivtv3: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv3: Encoder revision: 0x02050032 ivtv3: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv3: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv3: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv3: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 4-0060: type set to 53 (Philips FQ1286) ivtv3: Initialized Nagase Transgear 5000TV, card #3 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
