Hi. I'm having problems getting a new PVR-150 to work on my Shuttle FX-43G system running Fedora Core 5.
Sometimes I get: tveeprom 1-0050: Ran out of data! ivtv0: No tuner detected, default to NTSC tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Once I got: tveeprom 1-0050: Hauppauge model 26132, rev F0B2, serial# 9400151 tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25841 (idx 35) tveeprom 1-0050: decoder processor is CX25841 (idx 28) tveeprom 1-0050: has no radio, has IR remote tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) but mostly I get: tveeprom 1-0050: Huh, no eeprom present (err=-121)? tveeprom 1-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC with no rhyme or reason to it. Reboot, and get a different one of the above. Here's a sample of the full IVTV from dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.2 (tagged release) loading ivtv: Linux version: 2.6.16-1.2122_FC5 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 21 tveeprom 1-0050: Huh, no eeprom present (err=-121)? tveeprom 1-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x40045613! ivtv0: i2c addr 0x44 not found for command 0xc0045627! ivtv0: i2c hardware 0x00000020 not found for command 0x40345622! ivtv0: i2c addr 0x44 not found for command 0x40345622! ivtv0: i2c addr 0x44 not found for command 0x40045612! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x40045613! ivtv0: i2c addr 0x44 not found for command 0x40045612! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
