On 12/06/2006, at 12:10 AM, Hans Verkuil wrote:
'didn't work' as in: it refused to load, or as in: nothing appeared in the log? The modprobe.conf options line is correct.
The logs show the drivers loading, but then these errors at the end: ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x40045613! ivtv0: i2c addr 0x44 not found for command 0xc0045627! ivtv0: i2c addr 0x44 not found for command 0x40345622! ivtv0: i2c addr 0x44 not found for command 0x40045612! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x40045613! ivtv0: i2c addr 0x44 not found for command 0x40045612! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0Other than this all the associated modules appear to load fine: tuner, tveeprom, wm8775 and tda9887.
Try two things: First load ivtv with the newi2c=0 option.
That seemed to make no difference except "i2cdetect -l" showed it loading in i2c-3 and i2c-4 after the NVIDIA device. With the option removed, it loads as i2c-0 and i2c-1 and the NVIDIA driver after.
If that still gives the same problems, then use 'i2cdetect -a 0' to see if the cx25840 is evendetected on the i2c bus. If not (you get 'XX' for address 0x44) then itis likely to be a hardware problem.
0x43 shows UU, but 0x44 shows XX. So this means the card itself is being detected, but a particular address mapped to the card is faulty? I guess it is possible that this was just coincidental to my upgrade of the kernel. Perhaps I need to purchase another card to test for sure.
If it is important, my working card (PVR 250) at ivtv1 shows XX in that address as well, but it isn't trying to use cx25840.
Thanks Ari Maniatis --------------------------> ish http://www.ish.com.au Level 1, 30 Wilson Street Newtown 2042 Australia phone +61 2 9550 5001 fax +61 2 9550 4001 PGP fingerprint 08 57 20 4B 80 69 59 E2 A9 BF 2D 48 C2 20 0C C8
PGP.sig
Description: This is a digitally signed message part
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
