Hans Verkuil wrote: >> Hello, >> >> I have a ivtv-driven card, and the drivers say it's unknown. Here are >> the details: >> > > Interesting, an Avermedia card. Can you give me: > > 1) The card model. > This may sound strange, but... it's a design reference card. It has no model name. :) > 2) A list of the chips that are on the board. > It has these chips: - Conexant CX23416-22 - Conexant CX25841-23 - ESMT m12L64322a > 3) Which tuner is used on the board. > No tuner. > Note that it may take some time to get this working depending on what sort > of chips are on the board. > I'm getting the Windows drivers from Conexant (ETA unknown) too. Would those help in any way? > Regards, > > Hans > > >> lspci: >> >> 0000:00:09.0 Multimedia video controller: Internext Compression Inc >> iTVC16 (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Avermedia Technologies Inc: Unknown device c03f >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >> ParErr- Stepping- SERR- FastB2B- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- >> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 (32 >> bytes) >> Interrupt: pin A routed to IRQ 153 >> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >> >> >> dmesg: >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.6.3 (tagged release) loading >> ivtv: Linux version: 2.6.16.20-pluto-1-686 686 gcc-3.3 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Unknown card: vendor/device: 4444/0016 >> ivtv0: subsystem vendor/device: 1461/c03f >> ivtv0: cx23416 based >> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card >> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and >> what kind of >> ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) >> ivtv0: Prefix your subject line with [UNKNOWN CARD]. >> cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) >> cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) >> tveeprom 1-0050: Huh, no eeprom present (err=-121)? >> tveeprom 1-0050: Encountered bad packet header [01]. Corrupt or not a >> Hauppauge eeprom. >> ivtv0: No tuner detected, default to NTSC >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) >> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) >> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) >> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB >> total) >> ivtv0: i2c hardware 0x00000020 not found for command 0x40345622! >> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> >>
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
