Hans Verkuil wrote: > Try to force the card to a GotView PCI DVD2 (I think that's the > 'card_type=16' ivtv module option, you can check it with 'modinfo ivtv'). > > That card comes close to you configuration. It will try to use a tuner > (which may cause some warnings in the log) and it exposes a non-existant > radio device, but otherwise it just might work for composite/S-Video > input. > > All I'm getting is black image on the Composite input.
On the S-Video input there is nothing connected, but I get some red lines on a black background. >> Hans Verkuil wrote: >> >>>> Hello, >>>> >>>> I have a ivtv-driven card, and the drivers say it's unknown. Here are >>>> the details: >>>> >>>> >>> Interesting, an Avermedia card. Can you give me: >>> >>> 1) The card model. >>> >>> >> This may sound strange, but... it's a design reference card. It has no >> model name. :) >> >>> 2) A list of the chips that are on the board. >>> >>> >> It has these chips: >> - Conexant CX23416-22 >> - Conexant CX25841-23 >> - ESMT m12L64322a >> >>> 3) Which tuner is used on the board. >>> >>> >> No tuner. >> >>> Note that it may take some time to get this working depending on what >>> sort >>> of chips are on the board. >>> >>> >> I'm getting the Windows drivers from Conexant (ETA unknown) too. Would >> those help in any way? >> >>>> lspci: >>>> >>>> 0000:00:09.0 Multimedia video controller: Internext Compression Inc >>>> iTVC16 (CX23416) MPEG-2 Encoder (rev 01) >>>> Subsystem: Avermedia Technologies Inc: Unknown device c03f >>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- >>>> ParErr- Stepping- SERR- FastB2B- >>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >>>> >>>>> TAbort- >>>>> >>>> <TAbort- <MAbort- >SERR- <PERR- >>>> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 0x08 >>>> (32 >>>> bytes) >>>> Interrupt: pin A routed to IRQ 153 >>>> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] >>>> Capabilities: [44] Power Management version 2 >>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>> Status: D0 PME-Enable- DSel=0 DScale=0 PME- >>>> >>>> >>>> dmesg: >>>> >>>> ivtv: ==================== START INIT IVTV ==================== >>>> ivtv: version 0.6.3 (tagged release) loading >>>> ivtv: Linux version: 2.6.16.20-pluto-1-686 686 gcc-3.3 >>>> ivtv: In case of problems please include the debug info between >>>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>>> ivtv: any module options, when mailing the ivtv-users mailinglist. >>>> ivtv0: Unknown card: vendor/device: 4444/0016 >>>> ivtv0: subsystem vendor/device: 1461/c03f >>>> ivtv0: cx23416 based >>>> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card >>>> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs >>>> and >>>> what kind of >>>> ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) >>>> ivtv0: Prefix your subject line with [UNKNOWN CARD]. >>>> cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) >>>> cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) >>>> tveeprom 1-0050: Huh, no eeprom present (err=-121)? >>>> tveeprom 1-0050: Encountered bad packet header [01]. Corrupt or not a >>>> Hauppauge eeprom. >>>> ivtv0: No tuner detected, default to NTSC >>>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>>> ivtv0: Encoder revision: 0x02050032 >>>> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >>>> total) >>>> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB >>>> total) >>>> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB >>>> total) >>>> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers >>>> (2048KB >>>> total) >>>> ivtv0: i2c hardware 0x00000020 not found for command 0x40345622! >>>> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 >>>> ivtv: ==================== END INIT IVTV ==================== >>>> >>>> _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
