Le mardi 24 octobre 2006 à 16:01 +0200, Hans Verkuil a écrit : > Hi all, > > If you are running a 2.6.18 kernel with ivtv-0.8, then I'd appreciate it > if you can test the following beta driver:
b3490 seems to run fine so far: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.9.0 (development snapshot compiled on jeu 26 oct 2006 20:47:12 CEST) loading ivtv: Linux version: 2.6.18-1.2798.fc6 SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 tveeprom 2-0050: The eeprom says no radio is present, but the tuner type tveeprom 2-0050: indicates otherwise. I will assume that radio is present. tveeprom 2-0050: Hauppauge model 26039, rev C1A5, serial# 8203263 tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: audio processor is CX25842 (idx 36) tveeprom 2-0050: decoder processor is CX25842 (idx 29) tveeprom 2-0050: has radio, has IR remote tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (1 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv0 warning: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1456 ivtv0 warning: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140 ivtv0 warning: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 36 sz 1456 ivtv0 warning: Setup VBI start 0x002fea04 frames 4 fpi 1 lines 0x00000140 -- Nicolas Mailhot _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
