On Jan 19, 2007, at 4:17 AM, Wilhelm Eger wrote:
> Hi there,
>
> I have problems loading the driver. It locks up the system sometimes
> when loaded at boot sometimes not. same behavior when it is loaded
> from
> the command line. Warm or cold reboot doesn't seem to have any effects
> on this. Because of the hard lock ups I havn't any information
> provided
> by dmesg or similar. I have an uptodate gentoo system with 2.6.19 and
> ivtv 0.9.1. I use a WinTV PVR 350 with the latest firmware
> installed at
> /lib/firmware. ivtv is not loaded by udev. I disabled coldplugging for
> udev because of some reported bugs about it. Maybe its thte Via KT600
> chipset? I read about some troubles with via chipsets.
>
> Any suggestions?
Have you checked to see if the PVR350 shares an IRQ with any other
PCI devices? It works best when it has its own IRQ. You can check
/proc/interrupts
And you'll have to put the card in a different PCI slot if it does
share an IRQ with any other devices.
- Rick
> Greetings,
>
> Wilhelm
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
