Hello, I am running Fedora 7 and ivtv from atrpms. I recently upgraded from Fedora Core 6 which was running fine.
The kernel is 2.6.22.1-41.fc7 and ivtv is ivtv-1.0.1-133.fc7 / ivtv-kmdl-2.6.22.1-41.fc7-1.0.1-133.fc7 If I start recording streams with ivtv ( and mythtv ) my raid card will start to reset ivtv1: All encoder MPEG stream buffers are full. Dropping data. ivtv1: Cause: the application is not reading fast enough. 3w-9xxx: scsi0: WARNING: (0x06:0x000C): Character ioctl (0x108) timed out, resetting card. sd 0:0:0:0: WARNING: (0x06:0x002C): Command (0x2a) timed out, resetting card. 3w-9xxx: scsi0: AEN: INFO (0x04:0x005E): Cache synchronization completed:unit=0. I have put substantial load on the card and can't make it reset unless I use ivtv. I can just start two streams recording and I can cause the raid card to reset within 2-3 minutes. I also verified the two cards are not using the same interrupt. The relevant section from my modprobe.conf is: # Try to eliminate # "application is not reading fast enough" messages options ivtv enc_mpg_buffers=16 enc_vbi_buffers=4 It remember a problem in the past with ivtv where it help interrupts or something too long. I was wondering if this was a similar problem. I also switched back to 2.6.21 with video4linux-ivtv-kmdl-2.6.21-1.3194.fc7-20070420-80.fc7.x86_64 and I am not seeing the problem so far. Does anyone have any ideas on this issue? Michael I _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
