On Mon, Aug 06, 2007 at 09:53:48AM -0700, MythTV wrote: > Hello, > > I am running Fedora 7 and ivtv from atrpms. I recently upgraded from > Fedora Core 6 which was running fine. > > The kernel is 2.6.22.1-41.fc7 and ivtv is ivtv-1.0.1-133.fc7 / > ivtv-kmdl-2.6.22.1-41.fc7-1.0.1-133.fc7 > > If I start recording streams with ivtv ( and mythtv ) my raid card will > start to reset > > ivtv1: All encoder MPEG stream buffers are full. Dropping data. > ivtv1: Cause: the application is not reading fast enough. > 3w-9xxx: scsi0: WARNING: (0x06:0x000C): Character ioctl (0x108) timed > out, resetting card. > sd 0:0:0:0: WARNING: (0x06:0x002C): Command (0x2a) timed out, resetting > card. > 3w-9xxx: scsi0: AEN: INFO (0x04:0x005E): Cache synchronization > completed:unit=0.
Can you try the 3w-9xxx kmdl at ATrpms? Do they change this behaviour? > I have put substantial load on the card and can't make it reset unless I > use ivtv. I can just start two streams recording and I can cause the > raid card to reset within 2-3 minutes. I also verified the two cards > are not using the same interrupt. > > The relevant section from my modprobe.conf is: > > # Try to eliminate > # "application is not reading fast enough" messages > options ivtv enc_mpg_buffers=16 enc_vbi_buffers=4 > > It remember a problem in the past with ivtv where it help interrupts or > something too long. I was wondering if this was a similar problem. > > I also switched back to 2.6.21 with > video4linux-ivtv-kmdl-2.6.21-1.3194.fc7-20070420-80.fc7.x86_64 and I am > not seeing the problem so far. > > > Does anyone have any ideas on this issue? > > Michael > > > > > > > > I > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel -- Axel.Thimm at ATrpms.net
pgpMcduAd3NWS.pgp
Description: PGP signature
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
