On Wed, 2008-02-13 at 22:26 -0500, Ryan Watts wrote: > Hey Jim, > > Thanks for the reply. I haven't had a chance to mess with it lately, > but I did try a few things. > > The first link you sent appears to be for the ivtv driver and not the > cx18 I think. I tried doing a "modprobe cx18 newi2c=1" and it gives > me an 'unrecognized parameter' error. > > I think the eeprom must be at a different address or it has a totally > different rom layout. >
You can also use modinfo cx18 to get what parameters are supported. newi2c does not appear to be one. there is a debug parm with a list of bitmask values > I'll see if I can try playing with some more after the weekend. > > Thanks, > Ryan > > > On Feb 8, 2008 6:50 PM, [EMAIL PROTECTED] > <[EMAIL PROTECTED]> wrote: > Ryan Watts wrote: > > Hans, > > > > I was wondering if you have figured out any of the > differences > > between the 74021 and 74041. I have a 74041 and have tried > several > > different linux distributions and kernel versions and I get > > approximately the same error output from dmesg. > > > > Mythbuntu 7.01 > > Kernel 2.6.22-14 > > Latest driver as of 1/30/2008 > > > > > [snip] > > I get the same "tveeprom 1-0050: Huh, no eeprom present > (err=-121)?" > > error with different kernels. I tried to find out what > error -121 is, > > but could not determine much from the i2c code. I modified > the code > > to force an eeprom dump, but I have no idea if it is the > actual > > eeprom. (I couldn't decode it using the info in the cx18 > source) > > > > Anyhow, I am a computer engineer and would love to help > out. I am > > really excited about getting this card going in my linux > box. Let me > > know what I need to do to help. (Are there any specs from > hauppauge on > > the 74041?) > > > > > > Thanks, > > Ryan > > Hi Ryan, > > I have the same eeprom error problems you have. I tried the > following > troubleshooting step, but it didn't help me: > > http://ivtvdriver.org/index.php/Troubleshooting#Error:_Huh.2C_no_eeprom_present_.28err.3D-121.29.3F > > I also tested my card in Windows to be sure it works. > > I posted my info on the users list which is archived here: > http://www.gossamer-threads.com/lists/ivtv/users/37475 > > I tried again a night or two ago with the latest code and > still have the > same problems. > > Thanks, > Jim > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
