Ok, you're right. It seems like version 0.1.9 already comes with Mandrake 10.1 
and this is the one that loads...

For some reason, the 0.3 driver seems to get installed into its own 
directory /lib/modules/2.6.8.1-12mdkcustom/extra

So now I need to figure out how to make the 0.3 driver replace the 0.1.9 
driver... Any advice?

Regards,
Kenneth

torsdagen den 2 december 2004 01.15 skrev Michael T. Dean:
> [EMAIL PROTECTED] wrote:
> >Hi.
> >
> >I bought a PVR 350 card a couple of weeks ago and I'm struggling to get it
> >working in Linux.
> >...
> >I have tried Ivtv driver 0.2.0 rc3 and now 0.3.1y, but the behaviour is
> >identical.
> >
> >After compiling, installing and loading the driver, this is how dmesg
> > looks: - - - - - -
> >ivtv: version 0.1.9 (0.1.10pre1) loading
>
> This is not version 0.2.0-rc3 or 0.3.1y--it's 0.1.10pre1.  That means
> that you either have multiple versions of the driver installed or the
> new versions are not actually installing.  (Or, you're posting an old
> copy of the output.)  Also, make sure you don't do a "grep ivtv" on the
> output when posting here--there are a lot of important lines of output
> that do not include ivtv.
>
> >...
> >ivtv: i2c client addr: 0x61 not found!
> >ivtv: i2c client addr: 0x61 not found!
>
> Your tuner module is not loaded.
>
> >ivtv: i2c client addr: 0x40 not found!
>
> Some other module is not loaded.  Both of these problems may be fixed by
> a good install and the corrections mentioned below.
>
> >...
> >These are the lines in my /etc/modprobe.conf :
> >
> >alias char-major-81 videodev
> >alias char-major-81-0 ivtv
> >options ivtv ivtv_debug=1 ivtv_pal=1 tuner=5
>
> You actually have tuner type 38.  If using 0.2.0rc or above, do *not*
> specify the tuner option, and you probably shouldn't specify the pal
> option, either.  Note, however, you may need to specify "tda9887=1"
> depending on your video standard.
>
> >...
> >
> >Does anybody have a clue what's going on? Or should I give up and wait for
> >newer Ivtv releases...
>
> The current versions should work.  Make sure you get a good install and
> that all previous versions of modules are removed.
>
> Good luck.  HTH.
>
> Mike
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> ivtv-devel mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to