Hi,
I get the same problem over and over.
As far as I can find, it is has to do with the saa7127 and the cx25840 sharing the same i2c address.
When I specify the i2c_enable option for these two modules I can not turn off the saa7127 for the pvr-150.
(modprobe saa7127 i2c_enable=-1) does not work for me.
If you only have a PVR-150, i also have a pvr-350, then leave the saa7127 module out of your startup script.
Today I'm going to test my pvr-150 on a different system, different motherboard and chipset, to see if this changes anything.
Regards,
Michel.
Keats wrote:
hi, i've installed ivtv-0.3.2b.tgz driver... it makes freeze the computer unless i loaded modules one by one... bahamut ~ # cat ./ivtv
#!/bin/bash echo Loading IVTV modules. echo tda9887
modprobe tda9887 secam=L debug=1
sleep 1
echo tveeprom
modprobe tveeprom tuner=51
sleep 1 echo tuner
modprobe tuner type=51 pal=L
sleep 1 echo msp3400
modprobe msp3400 once=1 simple=1 debug=1 standard=0x09 sleep 1 echo videodev
modprobe videodev sleep 1 echo saa7115
modprobe saa7115 sleep 1 echo saa7127
modprobe saa7127 sleep 1 echo cx25840
modprobe cx25840 sleep 1 echo wm8775
modprobe wm8775 sleep 1 echo ivtv
modprobe ivtv ivtv_debug=1 tuner=51 type=3
echo done
the result is : /= START INIT IVTV =/q' | tac
Jan 9 19:57:37 bahamut ivtv: ==================== START INIT IVTV ====================
Jan 9 19:57:37 bahamut ivtv: version 0.3.2 (a) loading
Jan 9 19:57:37 bahamut ivtv: Linux version: 2.6.10-gentoo-r4 preempt K7 4KSTACKS gcc-3.3
Jan 9 19:57:37 bahamut ivtv: In case of problems please include the debug info
Jan 9 19:57:37 bahamut ivtv: between the START INIT IVTV and END INIT IVTV lines when
Jan 9 19:57:37 bahamut ivtv: mailing the ivtv-devel mailinglist.
Jan 9 19:57:37 bahamut ivtv: Autodetected WinTV PVR 150 card
Jan 9 19:57:37 bahamut ivtv: Found an iTVC16 based chip
Jan 9 19:57:37 bahamut ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
Jan 9 19:57:37 bahamut ivtv: VIA PCI device: 0x3189 vendor: 0x1106
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 43
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut tda9885/6/7: chip found @ 0x86
Jan 9 19:57:37 bahamut ivtv: i2c attach [client=tda9887,ok]
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: client [tda9887] registered to adapter
Jan 9 19:57:37 bahamut registering 1-0043
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 4b
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 50
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 1 bytes.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_recv: reading 16 bytes.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_recv: return:1 (count:16, addr:0x50)
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_recv: reading 16 bytes.
...
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_recv: reading 16 bytes.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_recv: return:1 (count:16, addr:0x50)
Jan 9 19:57:37 bahamut tveeprom: Hauppauge: model = 26059, rev = C155, serial# = 2897026
Jan 9 19:57:37 bahamut tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 4)
Jan 9 19:57:37 bahamut tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jan 9 19:57:37 bahamut tveeprom: audio_processor = MSP3410D (type = 5)
Jan 9 19:57:37 bahamut ivtv: i2c attach [client=tveeprom[0],ok]
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: client [tveeprom[0]] registered to adapter
Jan 9 19:57:37 bahamut registering 1-0050
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c_range entry for adapter 1, addr 0060
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c_range entry for adapter 1, addr 0061
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Jan 9 19:57:37 bahamut ivtv: i2c attach [client=(tuner unset),ok]
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: client [(tuner unset)] registered to adapter
Jan 9 19:57:37 bahamut registering 1-0061
Jan 9 19:57:37 bahamut tuner: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3)) by insmod option
Jan 9 19:57:37 bahamut tuner: The type=<n> insmod option will go away soon.
Jan 9 19:57:37 bahamut tuner: Please use the tuner=<n> option provided by
Jan 9 19:57:37 bahamut tuner: tv aard core driver (bttv, saa7134, ...) instead.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c_range entry for adapter 1, addr 0062
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
...
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c_range entry for adapter 1, addr 006f
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c_range entry for adapter 1, addr 0040
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 20
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 21
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 44
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: detecting saa7127 client on address 0x88
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
...
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Selecting NTSC video Standard
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
...
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Selecting S-Video+Composite
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Turn WSS off
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Widescreen Mode 4:3 Full Format
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Selecting Normal Encoder Input
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut saa7127: Enable Video Output
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 2 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 2 msgs.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 2 msgs.
Jan 9 19:57:37 bahamut ivtv: i2c attach [client=saa7127[0],ok]
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: client [saa7127[0]] registered to adapter
Jan 9 19:57:37 bahamut registering 1-0044
Jan 9 19:57:37 bahamut cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 9 19:57:37 bahamut wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 1b
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_xfer: with 1 msgs.
Jan 9 19:57:37 bahamut wm8775: detecting client on address 0x36
Jan 9 19:57:37 bahamut wm8775: Offset reset.reg[0]=2e00
...
Jan 9 19:57:37 bahamut wm8775: Offset reset.reg[12]=2a00
Jan 9 19:57:37 bahamut wm8775: Updating reg[R23]=2e01 added Reset with default 1
...
Jan 9 19:57:37 bahamut wm8775: Updating reg[R21]=2a01 added AMX with default 1
Jan 9 19:57:37 bahamut wm8775: Final reset.reg[0]=2e01
...
Jan 9 19:57:37 bahamut wm8775: Offset reset.reg[12]=2a00
Jan 9 19:57:37 bahamut wm8775: Updating reg[R23]=2e01 added Reset with default 1
...
Jan 9 19:57:37 bahamut wm8775: Updating reg[R21]=2a01 added AMX with default 1
Jan 9 19:57:37 bahamut wm8775: Final reset.reg[0]=2e01
...
Jan 9 19:57:37 bahamut wm8775: Final reset.reg[12]=2a01
Jan 9 19:57:37 bahamut wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
Jan 9 19:57:37 bahamut wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
Jan 9 19:57:37 bahamut wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
Jan 9 19:57:37 bahamut wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
Jan 9 19:57:37 bahamut wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
Jan 9 19:57:37 bahamut wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
Jan 9 19:57:37 bahamut wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
Jan 9 19:57:37 bahamut wm8775: Updating register 2 (R11), config: 1622 active: 1621.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut wm8775: Updating register 3 (R12), config: 1802 active: 1902.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
Jan 9 19:57:37 bahamut wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
Jan 9 19:57:37 bahamut wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
Jan 9 19:57:37 bahamut wm8775: Skipping register 7 (R16), config: 207b active: 207b.
Jan 9 19:57:37 bahamut wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
Jan 9 19:57:37 bahamut wm8775: Updating register 9 (R18), config: 2432 active: 2482.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut wm8775: Updating register 10 (R19), config: 2600 active: 2601.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
Jan 9 19:57:37 bahamut wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: master_send: writing 2 bytes.
Jan 9 19:57:37 bahamut ivtv: i2c attach [client=wm8775[0],ok]
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: client [wm8775[0]] registered to adapter
Jan 9 19:57:37 bahamut registering 1-001b
Jan 9 19:57:37 bahamut i2c_adapter i2c-1: registered as adapter #1
Jan 9 19:57:38 bahamut ivtv: Encoder revision: 0x02040024
Jan 9 19:57:38 bahamut ivtv: Encoder Firmware may be buggy, use version 0x02040011
Jan 9 19:57:38 bahamut ivtv: Configuring WinTV PVR 150 card with 4 streams
Jan 9 19:57:38 bahamut ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
Jan 9 19:57:38 bahamut ivtv: Registered v4l2 device, streamtype 0 minor 0
Jan 9 19:57:38 bahamut ivtv: Create DMA stream 1 Jan 9 19:57:38 bahamut ivtv: Registered v4l2 device, streamtype 1 minor 32
Jan 9 19:57:38 bahamut ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
Jan 9 19:57:38 bahamut ivtv: Registered v4l2 device, streamtype 2 minor 224
Jan 9 19:57:38 bahamut ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Jan 9 19:57:38 bahamut ivtv: Registered v4l2 device, streamtype 3 minor 24
Jan 9 19:57:38 bahamut ivtv: Setting Tuner 51
Jan 9 19:57:38 bahamut ivtv: Could not detect tuner standard, defaulting to NTSC.
Jan 9 19:57:38 bahamut i2c_adapter i2c-1: master_send: writing 4 bytes.
Jan 9 19:57:38 bahamut ivtv: Switching standard to NTSC.
Jan 9 19:57:38 bahamut i2c_adapter i2c-1: master_send: writing 4 bytes.
Jan 9 19:57:38 bahamut ivtv: Initialized WinTV PVR 150, card #0
Jan 9 19:57:38 bahamut ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 16437, itv = 0xe159db20
with tuner=51 or 50 its seems ok with ohers it says tuner is not set
but when i try mplayer /dev/video0 there is nothing... is anybody know why ?
card info : 0000:00:0f.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8003
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at e0000000 (32-bit, prefetchable)
Capabilities: [44] Power Management version 2
Format Tuner TV : Tuner PAL BG/ SECAM L 125 chaines Entrée Vidéo : 1 Composite RCA & 1 S-Vidéo
thanx for helping...
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
