update to the latest rc candidate. i think we're on rc3d.
if you're still having problems, post the output from tveeprom and we'll try to help -tmk --- Christopher Arnold <[EMAIL PROTECTED]> wrote: > > Hi all, > > i have a new PVR-350 wich refuses to receive any > stations only static > noice. > > Im googled a lot and it seems like i have an issue > with detecting the > right tuner. Can anyone figure out wich tuner i > should use? > > Im running: > 2.6.10-1.9_FC2 > iTVC15 driver: 0.1.10-49_pre2_ck100zz.rhfc2.at > > As you can se in the ivtv output below it gets the > -19 error when trying > to read the eeprom. Could this be my issue? > Or is it a matter of yet another type of tuner? > > Any help on this issue would be appreciated. > > /Chris > > > # lsmod| grep eep > tveeprom 11032 0 > i2c_core 21057 6 > msp3400,saa7127,saa7115,tuner,tveeprom,i2c_algo_bit > > > Jan 20 18:00:10 tv kernel: ivtv: > ==================== START INIT IVTV > ==================== > Jan 20 18:00:10 tv kernel: ivtv: version 0.1.10 > (0.1.10-49_pre2_ck100zz.rhfc2.at) loading > Jan 20 18:00:10 tv kernel: ivtv: Linux version: > 2.6.10-1.9_FC2 686 REGPARM 4KSTACKS gcc-3.3 > Jan 20 18:00:10 tv kernel: ivtv: In case of problems > please include the debug info > Jan 20 18:00:10 tv kernel: ivtv: between the START > INIT IVTV and END INIT IVTV lines when > Jan 20 18:00:10 tv kernel: ivtv: mailing the > ivtv-devel mailinglist. > Jan 20 18:00:10 tv kernel: ivtv: User specified > WinTV PVR 350 card > Jan 20 18:00:10 tv kernel: ivtv: Found an iTVC15 > based chip > Jan 20 18:00:10 tv kernel: ACPI: PCI interrupt > 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 > Jan 20 18:00:10 tv kernel: ivtv: pci: VIA detected > device: 0x0258 vendor: 0x1106 > Jan 20 18:00:10 tv kernel: tuner: chip found at addr > 0xc2 i2c-bus ivtv i2c driver #0 > Jan 20 18:00:10 tv kernel: ivtv: i2c attach > [client=(tuner unset),ok] > Jan 20 18:00:11 tv kernel: saa7115: starting probe > for adapter ivtv i2c driver #0 (0x10005) > Jan 20 18:00:11 tv kernel: saa7115: detecting > saa7115 client on address 0x42 > Jan 20 18:00:11 tv kernel: saa7115: writing init > values > Jan 20 18:00:11 tv kernel: ivtv: i2c attach > [client=saa7115[1],ok] > Jan 20 18:00:11 tv kernel: saa7115: status: (1E) > 0x48, (1F) 0xc0 > Jan 20 18:00:11 tv kernel: saa7127: Selecting NTSC > video Standard > Jan 20 18:00:11 tv kernel: saa7127: Selecting > S-Video+Composite > Jan 20 18:00:11 tv kernel: saa7127: Turn WSS off > Jan 20 18:00:11 tv kernel: saa7127: Widescreen Mode > 4:3 Full Format > Jan 20 18:00:11 tv kernel: saa7127: Selecting Normal > Encoder Input > Jan 20 18:00:11 tv kernel: saa7127: Enable Video > Output > Jan 20 18:00:11 tv kernel: ivtv: i2c attach > [client=saa7127[1],ok] > Jan 20 18:00:11 tv kernel: msp34xx: init: > chip=MSP3418W-B3 +nicam +simple +simpler +radio > mode=simple > Jan 20 18:00:11 tv kernel: ivtv: i2c attach > [client=MSP3418W-B3,ok] > Jan 20 18:00:11 tv kernel: msp3410: daemon started > Jan 20 18:00:11 tv kernel: ivtv: i2c client addr: > 0x50 not found! > Jan 20 18:00:11 tv kernel: ivtv: Error -19 reading > Hauppauge eeprom. > Jan 20 18:00:11 tv kernel: ivtv: Possible causes: > the tveeprom module was not loaded, or > Jan 20 18:00:11 tv kernel: ivtv: the eeprom kernel > module was loaded before the tveeprom module. > Jan 20 18:00:12 tv kernel: ivtv: Encoder revision: > 0x02040024 > Jan 20 18:00:12 tv kernel: ivtv: Decoder revision: > 0x02020023 > Jan 20 18:00:12 tv kernel: ivtv: Configuring WinTV > PVR 350 card with 9 streams > Jan 20 18:00:12 tv kernel: ivtv: Create DMA stream 0 > using 128 buffers of size 32768 > Jan 20 18:00:12 tv kernel: ivtv: Create DMA stream 1 > using 128 buffers of size 32768 > Jan 20 18:00:12 tv kernel: ivtv: Create stream 2 > using 128 buffers of size 52224 > Jan 20 18:00:12 tv kernel: ivtv: Create DMA stream 3 > using 128 buffers of size 32768 > Jan 20 18:00:12 tv kernel: ivtv: Create stream 4 > Jan 20 18:00:12 tv kernel: ivtv: Create DMA stream 5 > using 16 buffers of size 32768 > Jan 20 18:00:12 tv kernel: ivtv: Create stream 6 > using 128 buffers of size 4096 > Jan 20 18:00:12 tv kernel: ivtv: Create stream 7 > Jan 20 18:00:12 tv kernel: ivtv: Create DMA stream 8 > using 16 buffers of size 32768 > Jan 20 18:00:12 tv kernel: ivtv: Setting Tuner 50 > Jan 20 18:00:12 tv kernel: tuner: type set to 50 > (TCL 2002N) by ivtv i2c driver #0 > Jan 20 18:00:12 tv kernel: ivtv: Setting audio > matrix to input 3, output 1 > Jan 20 18:00:12 tv kernel: ivtv: Switching standard > to PAL. > Jan 20 18:00:12 tv kernel: saa7115: decoder set norm > PAL > Jan 20 18:00:12 tv kernel: saa7115: set audio: 0x01 > Jan 20 18:00:12 tv kernel: saa7127: Setting Encoder > Video Standard > Jan 20 18:00:12 tv kernel: saa7127: Set PAL Video > Mode > Jan 20 18:00:12 tv kernel: saa7127: Selecting PAL > video Standard > Jan 20 18:00:12 tv kernel: ivtv: Initialized WinTV > PVR 350, card #0 > Jan 20 18:00:12 tv kernel: ivtv: > ==================== END INIT IVTV > ==================== > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IntelliVIEW -- > Interactive Reporting > Tool for open source databases. Create drag-&-drop > reports. Save time > by over 75%! Publish reports on the web. Export to > DOC, XLS, RTF, etc. > Download a FREE copy at > http://www.intelliview.com/go/osdn_nl > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
