On Thu, 20 Jan 2005, kevin thayer wrote:
Sorry for that. I have tried so many combinations back and forward so i lost where i where...update to the latest rc candidate.
i think we're on rc3d.
Now im back at: version: 0.2.0-62_rc3d.rhfc2.at vermagic: 2.6.10-1.9_FC2 686 REGPARM 4KSTACKS gcc-3.3
Wich output from tveeprom? As seen in the output from ivtv seen below i get:if you're still having problems, post the output from tveeprom and we'll try to help
ivtv: i2c client addr: 0x50 not found!
ivtv: Error -19 reading Hauppauge eeprom.
And yes the tveeprom module is loaded.
#lsmod|grep eep tveeprom 11032 0 i2c_core 21057 6 msp3400,saa7127,saa7115,tuner,tveeprom,i2c_algo_bit
Anyone who have some more clues? Or am i missing something?
/Chris
Jan 20 21:43:28 tv kernel: ivtv: ==================== START INIT IVTV ====================
Jan 20 21:43:28 tv kernel: ivtv: version 0.2.0 (rc3b) loading
Jan 20 21:43:28 tv kernel: ivtv: Linux version: 2.6.10-1.9_FC2 686 REGPARM 4KSTACKS gcc-3.3
Jan 20 21:43:28 tv kernel: ivtv: In case of problems please include the debug info
Jan 20 21:43:28 tv kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Jan 20 21:43:28 tv kernel: ivtv: mailing the ivtv-devel mailinglist.
Jan 20 21:43:28 tv kernel: ivtv: Autodetected WinTV PVR 350 card
Jan 20 21:43:28 tv kernel: ivtv: Found an iTVC15 based chip
Jan 20 21:43:28 tv kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
Jan 20 21:43:28 tv kernel: ivtv: VIA PCI device: 0x0258 vendor: 0x1106
Jan 20 21:43:28 tv kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Jan 20 21:43:28 tv kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jan 20 21:43:28 tv kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
Jan 20 21:43:28 tv kernel: saa7115: detecting saa7115 client on address 0x42
Jan 20 21:43:29 tv kernel: saa7115: writing init values
Jan 20 21:43:29 tv kernel: ivtv: i2c attach [client=saa7115[1],ok]
Jan 20 21:43:29 tv kernel: saa7115: status: (1E) 0x40, (1F) 0xc0
Jan 20 21:43:29 tv kernel: saa7127: Selecting NTSC video Standard
Jan 20 21:43:29 tv kernel: saa7127: Selecting S-Video+Composite
Jan 20 21:43:29 tv kernel: saa7127: Turn WSS off
Jan 20 21:43:29 tv kernel: saa7127: Widescreen Mode 4:3 Full Format
Jan 20 21:43:29 tv kernel: saa7127: Selecting Normal Encoder Input
Jan 20 21:43:29 tv kernel: saa7127: Enable Video Output
Jan 20 21:43:29 tv kernel: ivtv: i2c attach [client=saa7127[1],ok]
Jan 20 21:43:29 tv kernel: msp34xx: init: chip=MSP3418W-B3 +nicam +simple +simpler +radio mode=simple
Jan 20 21:43:29 tv kernel: ivtv: i2c attach [client=MSP3418W-B3,ok]
Jan 20 21:43:29 tv kernel: msp3410: daemon started
Jan 20 21:43:29 tv kernel: ivtv: i2c client addr: 0x50 not found!
Jan 20 21:43:29 tv kernel: ivtv: Error -19 reading Hauppauge eeprom.
Jan 20 21:43:29 tv kernel: ivtv: Possible causes: the tveeprom module was not loaded, or
Jan 20 21:43:29 tv kernel: ivtv: the eeprom kernel module was loaded before the tveeprom module.
Jan 20 21:43:29 tv kernel: ivtv: Encoder revision: 0x02040024
Jan 20 21:43:29 tv kernel: ivtv: Encoder Firmware is buggy, use version 0x02040011
Jan 20 21:43:29 tv kernel: ivtv: Decoder revision: 0x02020023
Jan 20 21:43:29 tv kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams
Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0
Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 1
Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32
Jan 20 21:43:29 tv kernel: ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224
Jan 20 21:43:29 tv kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
Jan 20 21:43:29 tv kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24
Jan 20 21:43:29 tv kernel: ivtv: Create stream 4
Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64
Jan 20 21:43:30 tv kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16
Jan 20 21:43:30 tv kernel: ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228
Jan 20 21:43:30 tv kernel: ivtv: Create stream 7
Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232
Jan 20 21:43:30 tv kernel: ivtv: Create DMA stream 8
Jan 20 21:43:30 tv kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48
Jan 20 21:43:30 tv kernel: ivtv: Could not detect tuner standard, defaulting to NTSC.
Jan 20 21:43:30 tv kernel: tuner: tuner type not set
Jan 20 21:43:30 tv kernel: ivtv: Setting audio matrix to input 3, output 1
Jan 20 21:43:30 tv kernel: ivtv: Switching standard to NTSC.
Jan 20 21:43:30 tv kernel: tuner: tuner type not set
Jan 20 21:43:30 tv kernel: saa7115: decoder set norm NTSC
Jan 20 21:43:30 tv kernel: saa7115: set audio: 0x01
Jan 20 21:43:30 tv kernel: saa7127: Setting Encoder Video Standard
Jan 20 21:43:30 tv kernel: saa7127: Set NTSC Video Mode
Jan 20 21:43:30 tv kernel: saa7127: Selecting NTSC video Standard
Jan 20 21:43:30 tv kernel: ivtv: ivtv_enc_thread: pid = 4002, itv = 0xe0b3a1a0
Jan 20 21:43:30 tv kernel: ivtv: ivtv_dec_thread: pid = 4003, itv = 0xe0b3a1a0
Jan 20 21:43:30 tv kernel: ivtv: Initialized WinTV PVR 350, card #0
Jan 20 21:43:30 tv kernel: ivtv: ==================== END INIT IVTV ====================
------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
