Hi Todd, Have you checked video1? With the patches, I'm getting video1 all of the time, but video0 only intermittantly (on both machines; the one with the i2c issues and the one without any other i2c devices). I've tried various modified tuner modules, but can't seem to figure out what the problem is. Just sometimes video0 works and sometimes it doesn't.
On the video0, I'm getting all static, but if I turn the sound all the way up, I can hear the sound from the same channel as video1, but staticy and hard to make out. The PVR-150s are supposed to be identical on the board? In sysfs, I'm getting 1-0060 and 2-0061 for the tuners. Is this normal? Thanks, Jason --- Todd Tidwell <[EMAIL PROTECTED]> wrote: > <Moving over from MythTV-Users> > > SO I tried what you said and removed all the > tuner.ko files except for the > one from IVTV and made sure both videos were set to > input 6. > > Same problem. I did notice that things are now > autodetecting the tuner > correctly, but all I get is static. > > Any more thoughts? > > -Todd > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Jarod Wilson > Sent: Sunday, February 27, 2005 11:26 AM > To: [email protected] > Subject: Re: [ivtv-devel] [PATCH] Working tveeprom > for NTSC PVR-500MCE reads > > On Sunday 27 February 2005 03:24, Joe Briggs wrote: > > Jarod, > > > > So if we get a clean .3.2e and apply your vsync > patch, we can skip the > > megapatch? > > I didn't write any vsync patch, that was someone > else... What I'm using is > the > megapatch I posted along with this tveeprom patch. > The tveeprom patch will > apply against a clean 0.3.2e, but probably won't do > you much good without > all > the other stuff in the megapatch. > > > On Sun, 2005-02-27 at 01:09, Jarod Wilson wrote: > > > With the attached patch, tveeprom now reads the > following off my NTSC > > > PVR-500MCE: > > > > > > tveeprom: Hauppauge: model = 23552, rev = D292, > serial# = 7725799 > > > tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, > type = 55) > > > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, > v4l2 = 0x00001000) > > > tveeprom: audio_processor = MSP3410D (type = 5) > > > > > > Patch is against a clean 0.3.2e, should apply to > both a clean 0.3.2e and > > > a 0.3.2e with the earlier megapatch, but needs > at least the FQ1236A MK4 > > > tuner def from the megapatch to be fully > functional. > > > -- > Jarod Wilson > [EMAIL PROTECTED] > > > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT > Products from real users. > Discover which products truly live up to the hype. > Start reading now. > http://ads.osdn.com/?ad_ide95&alloc_id396&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
