On Monday 07 March 2005 15:07, Roel Teuwen wrote: > On Mon, 7 Mar 2005 00:24:22 -0800, Jarod Wilson <[EMAIL PROTECTED]> wrote: > > If some PAL PVR-150 and/or 500 users could give these a shot, it'd be > > much appreciated. When coupled with Tyler's > > audiofmt-makefile-autotune.032g.patch patch, this *should* auto-detect > > and auto-configure both the LG and Philips tuners on PAL PVR-150 cards. > > > > FYI: > > The only difference on the tuner side is a renaming of both tuners to > > remove PVR-150 from their names (since they could be on other cards, more > > prep for having these changes in v4l-proper) and label the type 56 tuner > > what it really is, according to tveeprom output and the tveeprom index > > (FQ1216AME MK4, not FM1216ME). > > Using a PVR150 PAL and ivtv-0.3.2g or 0.3.2h with both patches applies > still only gives out static. I get the following : [...] > tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7730006 > tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) > tveeprom: audio_processor = MSP3400C (type = 4)
This part is good... [...] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by > insmod option > tuner: The type=<n> insmod option will go away soon. > tuner: Please use the tuner=<n> option provided by > tuner: tv aard core driver (bttv, saa7134, ...) instead. This is bad. This says you've got an insmod option that is forcing the tuner to type 2. Don't do that. :-) > ivtv: Tuner Type 55, Tuner formats 0x00000e07, Radio: yes, Model > 0x008d1657, Revision 0x00000000 > ivtv: PAL tuner detected More good stuff... > ivtv: Setting Tuner 55 > tuner: type already set to 2, ignoring request for 55 And that's ivtv trying to set the type correctly, but you've got the insmod option overriding it. > ivtv: ivtv_enc_thread: pid = 6434, itv = 0xd0119920 > ivtv: Switching standard to PAL. > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > The thing that troubles me is the tuner module setting the type to 2, > and printing "type already set to 2, ignoring request for 55". Any > insights would be greatly appreciated. Ah, so you did see that. This is what I get for starting a reply without reading the entire email first. ;-) Yes, this is definitely why you're getting static. > If any other information is needed, just ask. What does your /etc/modprobe.conf (or whatever equivalent your distro uses) look like? It seems there is an "options tuner type=2" line somewhere. -- Jarod Wilson [EMAIL PROTECTED]
pgpPSwXNcw6Ru.pgp
Description: PGP signature
