Hi,
So the tuner and tv-out both work on my pvr 350 (tuner 47) card using
ivtv 0.3.2i., but I had a couple questions.When I change channels with
ptune-ui or through mythtv, it takes around 5 seconds for the next
channel to display. Is this caused by the tuner or will the channels
change quicker if I was using a better system. My system is an 866 Mhz
pentium III with 256 megs of ram.
Also when using the TV Out, to display my desktop, a lot of the
desktop is cut off. Is there a way to change that. Here is the
important parts of my XF86Config-4 file
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
#Driver "fbdev"
Option "fbdev" "/dev/fb0"
#Option "ivtv" "/dev/fb0"
BusID "PCI:1:7:0" # lspci says 0000:01:07.0
EndSection
Section "Monitor"
Identifier "NTSC Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x480"
# D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
DotClock 34.564
HTimings 720 752 840 928
VTimings 480 484 488 504
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Screen"
Identifier "Screen0"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "NTSC Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
Modes "720x480"
EndSubsection
EndSection
thanks,
Jeff
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
