Later, I installed the following from atrpms.net: kernel-2.6.10-1.770_14.rhfc3.at video4linux-kmdl-2.6.10-1.770_14.rhfc3.at-20050310_100754-57.rhfc3.at ivtv-kmdl-2.6.10-1.770_14.rhfc3.at-0.3.2i-72.rhfc3.at
...and for a moment I thought the problem was gone. But, after about 3 minutes of video capture my computer rebooted. This happened whether I was running the capture from a command line (runlevel 3) or KDE.
Any help will be greatly appreciated.
My system is: AMD Athlon 1800 Biostar M7VIT motherboard with a VIA VT8377 (KT400)/VT8235 chipset and a Winbond W83697HF NVidia FX video card 1GB RAM Hauppauge 500MCE Fedora Core 3 480W Power Supply
and my ivtv log is as follows:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (i) loading
ivtv: Linux version: 2.6.10-1.770_14.rhfc3.at 686 REGPARM gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
tveeprom: The eeprom says no radio is present, but the tuner type
tveeprom: indicates otherwise. I will assume that radio is present.
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7805262
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded.
cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395
cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4
ivtv: i2c attach [client=cx25840[0],ok]
wm8775: Ignoring new-style parameters in presence of obsolete ones
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775[0],ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 4584, itv = 0xf8d26a20
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
tveeprom: The eeprom says no radio is present, but the tuner type
tveeprom: indicates otherwise. I will assume that radio is present.
tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7805262
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[1],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded.
cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395
cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4
ivtv: i2c attach [client=cx25840[1],ok]
wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02
wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00
wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03
wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00
wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00
wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01
wm8775: Updating register 0 (R23), config: 2e01 active: 2e00.
wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00.
wm8775: Updating register 2 (R11), config: 1622 active: 1621.
wm8775: Updating register 3 (R12), config: 1802 active: 1902.
wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00.
wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf.
wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf.
wm8775: Skipping register 7 (R16), config: 207b active: 207b.
wm8775: Skipping register 8 (R17), config: 2200 active: 2200.
wm8775: Updating register 9 (R18), config: 2432 active: 2482.
wm8775: Updating register 10 (R19), config: 2600 active: 2601.
wm8775: Skipping register 11 (R20), config: 2826 active: 2826.
wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f.
ivtv: i2c attach [client=wm8775[1],ok]
ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Setting Tuner 57
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ==================== END INIT IVTV ====================
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
