Could you tell where in Mythtv this is set?
Cheers,
-Morten
Haukur Hafsteinsson wrote:
I have fixed the problem, I had the
VBI interface (Vertical Blanking Interval) active. That caused cpu
going up to 90% and blocky picture.
Regards,
Haukur
If the picture is blocky, then it is most likely
that
your bitrate is too low
Try a setting of around 3000 or 4000 to get proper picture quality.
- Balaji
On Wednesday 30 March 2005 6:18 am, Haukur Hafsteinsson wrote:
> Hi All,
>
> My system:
> 866 MHz PIII
> 256Mb ram
> Mythtv 0.17
> Kernel 2.6.11.5
> SuSE 9.2
>
> I am currently using the 0.3.2p version of the ivtv driver on my
system.
> After installation with modprobe, I get a perfect video and sound
with
> mplayer, when streaming from /dev/video0. If I then use mythtv, the
> picture sometimes has small rectangles with wrong color here and
there
> (blocky picture), sound is ok. I know that there is not much cpu
power
> available (about 10% idle), but I have reduced the bitrate in
mythtv
(cpu
> becomes 30-40% idle), but no result. If I then again use mplayer,
it shows
> me the same corrupt picture as mythtv. I have to remove and insert
the
> ivtv module to get it working again with mplayer.
>
> Any ideas?
>
> Thanks
> Haukur.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real
users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
--
-------------------------------------------------------------------
WEB-fx http://www.webfx.no
Morten Lerskau Rønseth mailto:[EMAIL PROTECTED]
Odinsvei 15c +47 6680 9191
1413 Tårnåsen +47 9343 4357
Norway
-------------------------------------------------------
This SF.net email is sponsored by Demarc:
A global provider of Threat Management Solutions.
Download our HomeAdmin security software for free today!
http://www.demarc.com/Info/Sentarus/hamr30
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
|
- Re: [ivtv-devel] PVR 150MCE encoding/decoding problems... Morten Rønseth
-
