Update: Finally got the card to function with sound. While options tda9887=0 got rid of the snow, options tda9887 qss=0 gave me sound. This was an option I was using with my Cinergy 400 to (unsuccessfully) use internal sound.
Cheers, /drdaz On Apr 8, 2005 12:26 AM, Darren Black <[EMAIL PROTECTED]> wrote: > Hmm... I'm kind of at a loss here. Still no sound. Any ideas? Here's > my most recent log: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.2 (q) loading > ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 12 (level, low) -> IRQ 12 > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7862778 > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[1],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > ivtv: i2c attach [client=cx25840[1],ok] > ivtv: i2c attach [client=wm8775[1],ok] > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > 0x008d2590, Revision 0x00000001 > ivtv: PAL tuner detected > ivtv: SECAM tuner detected > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 58 > tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0 > ivtv: ivtv_enc_thread: pid = 5774, itv = 0xded1c220 > ivtv: Switching standard to PAL. > ivtv: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > > Cheers, > /drdaz > > On Apr 7, 2005 7:56 PM, Darren Black <[EMAIL PROTECTED]> wrote: > > Thanks for that... It turns out the snow was fixed by using options > > tda9885=0. Now I'm stuck on what everybody else seems to be having > > trouble with... no sound... > > > > Cheers! > > /drdaz > > > > On Apr 7, 2005 7:30 PM, Nick Rosier <[EMAIL PROTECTED]> wrote: > > > Check earlier messages regarding the different PAL-versions. It's just > > > the 1st it encounters. Shouldn't really be a problem but if you want > > > to make sure, options tuner pal=G will set it to PAL B/G. > > > > > > N. > > > > > > On Apr 7, 2005 6:58 PM, Darren Black <[EMAIL PROTECTED]> wrote: > > > > Update: > > > > > > > > It turns out I had left some lines in modprobe.conf related to my old > > > > TV card. I've removed them, and now the "tuner type not set" message > > > > is gone. Progress! I'm still only getting snow though... I'm thinking > > > > that the PAL(D/K) part of this log is perhaps the culprit? We use B/G > > > > here in Denmark... Any suggestions? > > > > > > > > Here's the log... A little healthier I think :-) > > > > > > > > ivtv: ==================== START INIT IVTV ==================== > > > > ivtv: version 0.3.2 (q) loading > > > > ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 > > > > ivtv: In case of problems please include the debug info > > > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > > > ivtv: mailing the ivtv-devel mailinglist. > > > > ivtv: Autodetected WinTV PVR 150 card > > > > ivtv: Found an iTVC16 based chip > > > > ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 12 (level, low) -> IRQ 12 > > > > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > > > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > > > ivtv: i2c attach [client=(tuner unset),ok] > > > > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > > > > cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > > > > cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > > > > ivtv: i2c attach [client=cx25840[3],ok] > > > > ivtv: i2c attach [client=wm8775[3],ok] > > > > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7862778 > > > > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > > > > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > > > > tveeprom: audio_processor = MSP3410D (type = 5) > > > > ivtv: i2c attach [client=tveeprom[0],ok] > > > > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > > > > 0x008d2590, Revision 0x00000001 > > > > ivtv: PAL tuner detected > > > > ivtv: SECAM tuner detected > > > > ivtv: Radio detected > > > > ivtv: Encoder revision: 0x02040024 > > > > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > > > > ivtv: Configuring WinTV PVR 150 card with 5 streams > > > > ivtv: Registered v4l2 device, streamtype 0 minor 0 > > > > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > > > > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 > > > > kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 32 > > > > ivtv: Create DMA stream 1 > > > > ivtv: Allocate DMA stream 1 > > > > ivtv: Registered v4l2 device, streamtype 2 minor 224 > > > > ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total > > > > ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes > > > > total > > > > ivtv: Registered v4l2 device, streamtype 3 minor 24 > > > > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > > > > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes > > > > total > > > > ivtv: Registered v4l2 device, streamtype 4 minor 64 > > > > ivtv: Create stream 4 > > > > ivtv: Allocate stream 4 > > > > ivtv: Setting Tuner 58 > > > > tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0 > > > > ivtv: Switching standard to PAL. > > > > ivtv: Initialized WinTV PVR 150, card #0 > > > > ivtv: ==================== END INIT IVTV ==================== > > > > ivtv: ivtv_enc_thread: pid = 6638, itv = 0xdec13220 > > > > cx25840: Decoder set size: ignoring bad config request Hsrc=720 > > > > Vsrc=487 width=720 height=576 > > > > > > ------------------------------------------------------- > > > SF email is sponsored by - The IT Product Guide > > > Read honest & candid reviews on hundreds of IT Products from real users. > > > Discover which products truly live up to the hype. Start reading now. > > > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > > > _______________________________________________ > > > ivtv-devel mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
